217 lines
6.7 KiB
C
217 lines
6.7 KiB
C
/*
|
|
* ----------------------------------------------------------------------------
|
|
* "THE BEER-WARE LICENSE" (Revision 42):
|
|
* <phk@login.dkuug.dk> wrote this file. As long as you retain this notice you
|
|
* can do whatever you want with this stuff. If we meet some day, and you think
|
|
* this stuff is worth it, you can buy me a beer in return. Poul-Henning Kamp
|
|
* ----------------------------------------------------------------------------
|
|
*
|
|
* $Id$
|
|
*
|
|
* Definitions for 5380 SCSI-controller chip.
|
|
*
|
|
* Derived from "NCR 53C80 Family SCSI Protocol Controller Data Manual"
|
|
*/
|
|
|
|
#ifndef _IC_NCR_5380_H_
|
|
#define _IC_NCR_5380_H_
|
|
|
|
#if 0 /* XXX */
|
|
/*
|
|
* Register map
|
|
*/
|
|
|
|
typedef struct {
|
|
volatile u_char sci_data; /* r: Current data */
|
|
#define sci_odata sci_data /* w: Out data */
|
|
|
|
volatile u_char sci_icmd; /* rw:Initiator command */
|
|
|
|
volatile u_char sci_mode; /* rw:Mode */
|
|
|
|
volatile u_char sci_tcmd; /* rw:Target command */
|
|
|
|
volatile u_char sci_bus_csr;/* r: Bus Status */
|
|
#define sci_sel_enb sci_bus_csr /* w: Select enable */
|
|
|
|
volatile u_char sci_csr; /* r: Status */
|
|
#define sci_dma_send sci_csr /* w: Start dma send data */
|
|
|
|
volatile u_char sci_idata; /* r: Input data */
|
|
#define sci_trecv sci_idata /* w: Start dma recv, target */
|
|
|
|
volatile u_char sci_iack; /* r: Interrupt Acknowledge */
|
|
#define sci_irecv sci_iack /* w: Start dma recv, initiator */
|
|
} sci_regmap_t;
|
|
|
|
|
|
/*
|
|
* Initiator command register
|
|
*/
|
|
|
|
#define SCI_ICMD_DATA 0x01 /* rw:Assert data bus */
|
|
#define SCI_ICMD_ATN 0x02 /* rw:Assert ATN signal */
|
|
#define SCI_ICMD_SEL 0x04 /* rw:Assert SEL signal */
|
|
#define SCI_ICMD_BSY 0x08 /* rw:Assert BSY signal */
|
|
#define SCI_ICMD_ACK 0x10 /* rw:Assert ACK signal */
|
|
#define SCI_ICMD_LST 0x20 /* r: Lost arbitration */
|
|
#define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */
|
|
#define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */
|
|
#define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */
|
|
#define SCI_ICMD_RST 0x80 /* rw:Assert RST signal */
|
|
|
|
|
|
/*
|
|
* Mode register
|
|
*/
|
|
|
|
#define SCI_MODE_ARB 0x01 /* rw: Start arbitration */
|
|
#define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */
|
|
#define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */
|
|
#define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */
|
|
#define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */
|
|
#define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */
|
|
#define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */
|
|
#define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake (MBZ) */
|
|
|
|
|
|
/*
|
|
* Target command register
|
|
*/
|
|
|
|
#define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */
|
|
#define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */
|
|
#define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */
|
|
#define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */
|
|
#define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */
|
|
#define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred
|
|
* (not on 5380/1) */
|
|
|
|
#define SCI_PHASE(x) SCSI_PHASE(x)
|
|
|
|
/*
|
|
* Current (SCSI) Bus status
|
|
*/
|
|
|
|
#define SCI_BUS_DBP 0x01 /* r: Data Bus parity */
|
|
#define SCI_BUS_SEL 0x02 /* r: SEL signal */
|
|
#define SCI_BUS_IO 0x04 /* r: I/O signal */
|
|
#define SCI_BUS_CD 0x08 /* r: C/D signal */
|
|
#define SCI_BUS_MSG 0x10 /* r: MSG signal */
|
|
#define SCI_BUS_REQ 0x20 /* r: REQ signal */
|
|
#define SCI_BUS_BSY 0x40 /* r: BSY signal */
|
|
#define SCI_BUS_RST 0x80 /* r: RST signal */
|
|
|
|
#define SCI_CUR_PHASE(x) SCSI_PHASE((x)>>2)
|
|
|
|
/*
|
|
* Bus and Status register
|
|
*/
|
|
|
|
#define SCI_CSR_ACK 0x01 /* r: ACK signal */
|
|
#define SCI_CSR_ATN 0x02 /* r: ATN signal */
|
|
#define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */
|
|
#define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */
|
|
#define SCI_CSR_INT 0x10 /* r: Interrupt request */
|
|
#define SCI_CSR_PERR 0x20 /* r: Parity error */
|
|
#define SCI_CSR_DREQ 0x40 /* r: DMA request */
|
|
#define SCI_CSR_DONE 0x80 /* r: DMA count is zero */
|
|
|
|
#endif /* XXX */
|
|
|
|
#define R_CSDR 0 /* R Current SCSI Data Reg. */
|
|
#define W_ODR 0 /* W Output Data Reg. */
|
|
|
|
#define R_ICR 1 /* R Initiator Command Reg. */
|
|
#define R_ICR_ASSERT_RST 0x80
|
|
#define R_ICR_ARBITRATION_IN_PROGRESS 0x40
|
|
#define R_ICR_LOST_ARBITRATION 0x20
|
|
#define R_ICR_ASSERT_ACK 0x10
|
|
#define R_ICR_ASSERT_BSY 0x08
|
|
#define R_ICR_ASSERT_SEL 0x04
|
|
#define R_ICR_ASSERT_ATN 0x02
|
|
#define R_ICR_ASSERT_DATA_BUS 0x01
|
|
|
|
#define W_ICR 1 /* W Initiator Command Reg. */
|
|
#define W_ICR_ASSERT_RST 0x80
|
|
#define W_ICR_TRI_STATE_MODE 0x40
|
|
#define W_ICR_DIFF_ENABLE 0x20
|
|
#define W_ICR_ASSERT_ACK 0x10
|
|
#define W_ICR_ASSERT_BSY 0x08
|
|
#define W_ICR_ASSERT_SEL 0x04
|
|
#define W_ICR_ASSERT_ATN 0x02
|
|
#define W_ICR_ASSERT_DATA_BUS 0x01
|
|
|
|
/*
|
|
* The mask to use when doing read_modify_write on ICR.
|
|
*/
|
|
#define RW_ICR_MASK (~(W_ICR_DIFF_ENABLE|W_ICR_TRI_STATE_MODE))
|
|
|
|
#define RW_MR 2 /* RW Mode Reg. */
|
|
#define RW_MR_BLOCK_MODE_DMA 0x80
|
|
#define RW_MR_TARGET_MODE 0x40
|
|
#define RW_MR_ENABLE_PARITY_CHECKING 0x20
|
|
#define RW_MR_ENABLE_PARITY_INTERRUPT 0x10
|
|
#define RW_MR_ENABLE_EOP_INTERRUPT 0x08
|
|
#define RW_MR_MONITOR_BUSY 0x04
|
|
#define RW_MR_DMA_MODE 0x02
|
|
#define RW_MR_ARBITRATE 0x01
|
|
|
|
#define R_TCR 3 /* R Target Command Reg. */
|
|
#define R_TCR_LAST_BYTE_SENT 0x80
|
|
/* R_TCR_RESERVED 0x40 */
|
|
/* R_TCR_RESERVED 0x20 */
|
|
/* R_TCR_RESERVED 0x10 */
|
|
#define R_TCR_ASSERT_REQ 0x08
|
|
#define R_TCR_ASSERT_MSG 0x04
|
|
#define R_TCR_ASSERT_CD 0x02
|
|
#define R_TCR_ASSERT_IO 0x01
|
|
|
|
#define W_TCR 3 /* W Target Command Reg. */
|
|
/* W_TCR_RESERVED 0x80 */
|
|
/* W_TCR_RESERVED 0x40 */
|
|
/* W_TCR_RESERVED 0x20 */
|
|
/* W_TCR_RESERVED 0x10 */
|
|
#define W_TCR_ASSERT_REQ 0x08
|
|
#define W_TCR_ASSERT_MSG 0x04
|
|
#define W_TCR_ASSERT_CD 0x02
|
|
#define W_TCR_ASSERT_IO 0x01
|
|
|
|
#define R_CSCR 4 /* R Current SCSI Bus Status Reg. */
|
|
#define R_CSCR_RST 0x80
|
|
#define R_CSCR_BSY 0x40
|
|
#define R_CSCR_REQ 0x20
|
|
#define R_CSCR_MSG 0x10
|
|
#define R_CSCR_CD 0x08
|
|
#define R_CSCR_IO 0x04
|
|
#define R_CSCR_SEL 0x02
|
|
#define R_CSCR_ACK 0x01
|
|
|
|
#define W_SER 4 /* W Select Enable Reg. */
|
|
#define W_SER_SCSI_ID_7 0x80
|
|
#define W_SER_SCSI_ID_6 0x40
|
|
#define W_SER_SCSI_ID_5 0x20
|
|
#define W_SER_SCSI_ID_4 0x10
|
|
#define W_SER_SCSI_ID_3 0x08
|
|
#define W_SER_SCSI_ID_2 0x04
|
|
#define W_SER_SCSI_ID_1 0x02
|
|
#define W_SER_SCSI_ID_0 0x01
|
|
|
|
#define R_BSR 5 /* R Bus and Status Reg. */
|
|
#define R_BSR_END_OF_DMA_XFER 0x80
|
|
#define R_BSR_DMA_REQUEST 0x40
|
|
#define R_BSR_PARITY_ERROR 0x20
|
|
#define R_BSR_INTERRUPT_REQUEST_ACTIVE 0x10
|
|
#define R_BSR_PHASE_MISMATCH 0x08
|
|
#define R_BSR_BUSY_ERROR 0x04
|
|
#define R_BSR_ATN 0x02
|
|
#define R_BSR_ACK 0x01
|
|
|
|
#define W_SDSR 5 /* W Start DMA Send Reg. */
|
|
#define R_IDR 6 /* R Input Data Reg. */
|
|
#define W_SDTR 6 /* W Start DMA Target Receive Reg. */
|
|
#define R_RPIR 7 /* R Reset Parity/Interrupt Reg. */
|
|
#define W_SDIR 7 /* W Start DMA Initiator Receive Reg. */
|
|
|
|
#endif /* _IC_NCR_5380_H_ */
|