freebsd_amp_hwpstate

History

Stefan Eßer 576b74fcc8 Add support for header type == 1 devices (PCI 2.1 compatible PCI to PCI bridges with support for 64 bit memory addresses and 32 bit I/O addresses). The code is not complete. It ignores the upper half of the long addresses. This is not a problem on PC compatible systems, but has to be fixed for real computers.		1996-11-12 23:18:12 +00:00
..
README.de	…
README.de-le	…
aic7870.c	Clean up the memory mapped/Programmed I/O stuff so that the driver completely	1996-11-11 05:26:14 +00:00
bt9xx.c	Updated #includes to 4.4lite style.	1996-10-15 19:22:46 +00:00
cy_pci.c	Updated #includes to 4.4lite style.	1996-10-15 19:22:46 +00:00
cy_pcireg.h	Changes to add support for the PCI version of the Cyclades Cyclom-Y	1996-10-13 01:09:24 +00:00
dc21040.h	…
if_de.c	Put the packet error printf inside #ifdef DIAGNOSTIC.	1996-11-10 13:36:46 +00:00
if_ed_p.c	Updated #includes to 4.4lite style.	1996-10-15 19:22:46 +00:00
if_fxp.c	Removed nested include if <sys/socket.h> from <net/if.h> and	1996-10-12 19:49:43 +00:00
if_fxpreg.h	…
if_lnc_p.c	…
if_pdq.c	…
if_sr_p.c	Add support for the SDL RISCom N2pci cards. Bring in the enhancements	1996-10-29 03:53:21 +00:00
if_vx_pci.c	New vx driver for:	1996-11-04 22:17:20 +00:00
locate.pl	…
meteor.c	Updated #includes to 4.4lite style.	1996-10-15 19:22:46 +00:00
meteor_reg.h	…
ncr.c	Only access the specific interrupt status registers if required.	1996-11-08 23:46:04 +00:00
ncrreg.h	…
pci.c	Add support for header type == 1 devices (PCI 2.1 compatible PCI to PCI	1996-11-12 23:18:12 +00:00
pci_ioctl.h	Add support for header type == 1 devices (PCI 2.1 compatible PCI to PCI	1996-11-12 23:18:12 +00:00
pcibus.h	…
pcireg.h	Add support for header type == 1 devices (PCI 2.1 compatible PCI to PCI	1996-11-12 23:18:12 +00:00
pcisupport.c	…
pcivar.h	…
pdq.c	…
pdq_os.h	…
pdqreg.h	…
wd82371.c	…
wd82371reg.h	…

README.de-le

$Id: README.de-le,v 1.1 1994/10/01 20:16:44 wollman Exp $

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/