262 lines
12 KiB
C
262 lines
12 KiB
C
/*
|
|
* Copyright (c) 2000 Doug Rabson & Andrew Gallatin
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Portions of this file were obtained from Compaq intellectual
|
|
* property which was made available under the following copyright:
|
|
*
|
|
* *****************************************************************
|
|
* * *
|
|
* * Copyright Compaq Computer Corporation, 2000 *
|
|
* * *
|
|
* * Permission to use, copy, modify, distribute, and sell *
|
|
* * this software and its documentation for any purpose is *
|
|
* * hereby granted without fee, provided that the above *
|
|
* * copyright notice appear in all copies and that both *
|
|
* * that copyright notice and this permission notice appear *
|
|
* * in supporting documentation, and that the name of *
|
|
* * Compaq Computer Corporation not be used in advertising *
|
|
* * or publicity pertaining to distribution of the software *
|
|
* * without specific, written prior permission. Compaq *
|
|
* * makes no representations about the suitability of this *
|
|
* * software for any purpose. It is provided "AS IS" *
|
|
* * without express or implied warranty. *
|
|
* * *
|
|
* *****************************************************************
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
* Registers in the T2 CBUS-to-PCI bridge as used in the SABLE
|
|
* systems.
|
|
*/
|
|
|
|
#define REGVAL(r) (*(volatile int32_t *) \
|
|
ALPHA_PHYS_TO_K0SEG(r + sable_lynx_base))
|
|
#define REGVAL64(r) (*(volatile int64_t *) \
|
|
ALPHA_PHYS_TO_K0SEG(r + sable_lynx_base))
|
|
|
|
#define SABLE_BASE 0x0UL /* offset of SABLE CSRs */
|
|
#define LYNX_BASE 0x8000000000UL /* offset of LYNX CSRs */
|
|
#define PCI0_BASE 0x38e000000UL
|
|
#define PCI1_BASE 0x38f000000UL
|
|
|
|
#define CBUS_BASE 0x380000000 /* CBUS CSRs */
|
|
#define T2_PCI_SIO 0x3a0000000 /* PCI sparse I/O space */
|
|
#define T2_PCI_CONF 0x390000000 /* PCI configuration space */
|
|
#define T2_PCI_SPARSE 0x200000000 /* PCI sparse memory space */
|
|
#define T2_PCI_DENSE 0x3c0000000 /* PCI dense memory space */
|
|
|
|
#define T2_IOCSR (CBUS_BASE + 0xe000000)
|
|
/* Low word */
|
|
#define T2_IOCSRL_EL 0x00000002UL /* loopback enable */
|
|
#define T2_IOCSRL_ESMV 0x00000004UL /* enable state machine visibility */
|
|
#define T2_IOCSRL_PDBP 0x00000008UL /* PCI drive bad parity */
|
|
#define T2_IOCSRL_SLOT0 0x00000030UL /* PCI slot 0 present bits */
|
|
#define T2_IOCSRL_PINT 0x00000040UL /* PCI interrupt */
|
|
#define T2_IOCSRL_ENTLBEC 0x00000080UL /* enable TLB error check */
|
|
#define T2_IOCSRL_ENCCDMA 0x00000100UL /* enable CXACK for DMA */
|
|
#define T2_IOCSRL_ENXXCHG 0x00000400UL /* enable exclusive exchange for EV5 */
|
|
#define T2_IOCSRL_CAWWP0 0x00001000UL /* CBUS command/address write wrong parity 0 */
|
|
#define T2_IOCSRL_CAWWP2 0x00002000UL /* CBUS command/address write wrong parity 2 */
|
|
#define T2_IOCSRL_CDWWPE 0x00004000UL /* CBUS data write wrong parity even */
|
|
#define T2_IOCSRL_SLOT2 0x00008000UL /* PCI slot 2 present bit */
|
|
#define T2_IOCSRL_PSERR 0x00010000UL /* power supply error */
|
|
#define T2_IOCSRL_MBA7 0x00020000UL /* MBA7 asserted */
|
|
#define T2_IOCSRL_SLOT1 0x000c0000UL /* PCI slot 1 present bits */
|
|
#define T2_IOCSRL_PDWWP1 0x00100000UL /* PCI DMA write wrong parity HW1 */
|
|
#define T2_IOCSRL_PDWWP0 0x00200000UL /* PCI DMA write wrong parity HW0 */
|
|
#define T2_IOCSRL_PBR 0x00400000UL /* PCI bus reset */
|
|
#define T2_IOCSRL_PIR 0x00800000UL /* PCI interface reset */
|
|
#define T2_IOCSRL_ENCOI 0x01000000UL /* enable NOACK, CUCERR and out-of-sync int */
|
|
#define T2_IOCSRL_EPMS 0x02000000UL /* enable PCI memory space */
|
|
#define T2_IOCSRL_ETLB 0x04000000UL /* enable TLB */
|
|
#define T2_IOCSRL_EACC 0x08000000UL /* enable atomic CBUS cycles */
|
|
#define T2_IOCSRL_ITLB 0x10000000UL /* flush TLB */
|
|
#define T2_IOCSRL_ECPC 0x20000000UL /* enable CBUS parity check */
|
|
#define T2_IOCSRL_CIR 0x40000000UL /* CBUS interface reset */
|
|
#define T2_IOCSRL_EPL 0x80000000UL /* enable PCI lock */
|
|
/* High word */
|
|
#define T2_IOCSRH_CBBCE 0x00000001UL /* CBUS back-to-back cycle enable */
|
|
#define T2_IOCSRH_TM 0x0000000eUL /* T2 revision number */
|
|
#define T2_IOCSRH_SMVL 0x00000070UL /* state machine visibility select */
|
|
#define T2_IOCSRH_SLOT2 0x00000080UL /* PCI slot 2 present bit */
|
|
#define T2_IOCSRH_EPR 0x00000100UL /* enable passive release */
|
|
#define T2_IOCSRH_CAWWP1 0x00001000UL /* cbus command/address write wrong parity 1 */
|
|
#define T2_IOCSRH_CAWWP3 0x00002000UL /* cbus command/address write wrong parity 3 */
|
|
#define T2_IOCSRH_DWWPO 0x00004000UL /* CBUS data write wrong parity odd */
|
|
#define T2_IOCSRH_PRM 0x00100000UL /* PCI read multiple */
|
|
#define T2_IOCSRH_PWM 0x00200000UL /* PCI write multiple */
|
|
#define T2_IOCSRH_FPRDPED 0x00400000UL /* force PCI RDPE detect */
|
|
#define T2_IOCSRH_PFAPED 0x00800000UL /* force PCI APE detect */
|
|
#define T2_IOCSRH_FPWDPED 0x01000000UL /* force PCI WDPE detect */
|
|
#define T2_IOCSRH_EPNMI 0x02000000UL /* enable PCI NMI */
|
|
#define T2_IOCSRH_EPDTI 0x04000000UL /* enable PCI DTI */
|
|
#define T2_IOCSRH_EPSEI 0x08000000UL /* enable PCI SERR interrupt */
|
|
#define T2_IOCSRH_EPPEI 0x10000000UL /* enable PCI PERR interrupt */
|
|
#define T2_IOCSRH_ERDPC 0x20000000UL /* enable PCI RDP interrupt */
|
|
#define T2_IOCSRH_EADPC 0x40000000UL /* enable PCI AP interrupt */
|
|
#define T2_IOCSRH_EWDPC 0x80000000UL /* enable PCI WDP interrupt */
|
|
|
|
#define T2_CERR1 (CBUS_BASE + 0xe000020)
|
|
#define T2_CERR2 (CBUS_BASE + 0xe000040)
|
|
#define T2_CERR3 (CBUS_BASE + 0xe000060)
|
|
#define T2_PERR1 (CBUS_BASE + 0xe000080)
|
|
#define T2_PERR1_PWDPE 0x00000001 /* PCI write data parity error */
|
|
#define T2_PERR1_PAPE 0x00000002 /* PCI address parity error */
|
|
#define T2_PERR1_PRDPE 0x00000004 /* PCI read data parity error */
|
|
#define T2_PERR1_PPE 0x00000008 /* PCI parity error */
|
|
#define T2_PERR1_PSE 0x00000010 /* PCI system error */
|
|
#define T2_PERR1_PDTE 0x00000020 /* PCI device timeout error */
|
|
#define T2_PERR1_NMI 0x00000040 /* PCI NMI */
|
|
|
|
#define T2_PERR2 (CBUS_BASE + 0xe0000a0)
|
|
#define T2_PSCR (CBUS_BASE + 0xe0000c0)
|
|
#define T2_HAE0_1 (CBUS_BASE + 0xe0000e0)
|
|
#define T2_HAE0_2 (CBUS_BASE + 0xe000100)
|
|
#define T2_HBASE (CBUS_BASE + 0xe000120)
|
|
#define T2_WBASE1 (CBUS_BASE + 0xe000140)
|
|
#define T2_WMASK1 (CBUS_BASE + 0xe000160)
|
|
#define T2_TBASE1 (CBUS_BASE + 0xe000180)
|
|
#define T2_WBASE2 (CBUS_BASE + 0xe0001a0)
|
|
#define T2_WMASK2 (CBUS_BASE + 0xe0001c0)
|
|
#define T2_TBASE2 (CBUS_BASE + 0xe0001e0)
|
|
#define T2_TLBBR (CBUS_BASE + 0xe000200)
|
|
#define T2_HAE0_3 (CBUS_BASE + 0xe000240)
|
|
#define T2_HAE0_4 (CBUS_BASE + 0xe000280)
|
|
|
|
/*
|
|
* DMA window constants, section 5.2.1.1.1 of the
|
|
* Sable I/O Specification
|
|
*/
|
|
|
|
#define T2_WINDOW_ENABLE 0x00080000
|
|
#define T2_WINDOW_DISABLE 0x00000000
|
|
#define T2_WINDOW_SG 0x00040000
|
|
#define T2_WINDOW_DIRECT 0x00000000
|
|
|
|
#define T2_WMASK_2G 0x7ff00000
|
|
#define T2_WMASK_1G 0x3ff00000
|
|
#define T2_WMASK_512M 0x1ff00000
|
|
#define T2_WMASK_256M 0x0ff00000
|
|
#define T2_WMASK_128M 0x07f00000
|
|
#define T2_WMASK_64M 0x03f00000
|
|
#define T2_WMASK_32M 0x01f00000
|
|
#define T2_WMASK_16M 0x00f00000
|
|
#define T2_WMASK_8M 0x00700000
|
|
#define T2_WMASK_4M 0x00300000
|
|
#define T2_WMASK_2M 0x00100000
|
|
#define T2_WMASK_1M 0x00000000
|
|
|
|
|
|
#define T2_WSIZE_2G 0x80000000
|
|
#define T2_WSIZE_1G 0x40000000
|
|
#define T2_WSIZE_512M 0x20000000
|
|
#define T2_WSIZE_256M 0x10000000
|
|
#define T2_WSIZE_128M 0x08000000
|
|
#define T2_WSIZE_64M 0x04000000
|
|
#define T2_WSIZE_32M 0x02000000
|
|
#define T2_WSIZE_16M 0x01000000
|
|
#define T2_WSIZE_8M 0x00800000
|
|
#define T2_WSIZE_4M 0x00400000
|
|
#define T2_WSIZE_2M 0x00200000
|
|
#define T2_WSIZE_1M 0x00100000
|
|
#define T2_WSIZE_0M 0x00000000
|
|
|
|
#define T2_TBASE_SHIFT 1
|
|
|
|
#define MASTER_ICU 0x535
|
|
#define SLAVE0_ICU 0x537
|
|
#define SLAVE1_ICU 0x53b
|
|
#define SLAVE2_ICU 0x53d
|
|
#define SLAVE3_ICU 0x53f
|
|
|
|
|
|
#define T2_EISA_IRQ_TO_STDIO_IRQ( x ) ((x) + 7)
|
|
#define T2_STDIO_IRQ_TO_EISA_IRQ( x ) ((x) - 7)
|
|
#define STDIO_PCI0_IRQ_TO_SCB_VECTOR( x ) (( ( x ) * 0x10) + 0x800)
|
|
#define STDIO_PCI1_IRQ_TO_SCB_VECTOR( x ) (( ( x ) * 0x10) + 0xC00)
|
|
|
|
/*
|
|
* T4 Control and Status Registers
|
|
*
|
|
* All CBUS CSRs in the Cbus2 IO subsystems are in the T4 gate array. The
|
|
* CBUS CSRs in the T4 are all aligned on hexaword boundaries and have
|
|
* quadword length. Note, this structure also works for T2 as the T2
|
|
* registers are a proper subset of the T3/T4's. Just make sure
|
|
* that T2 code does not reference T3/T4-only registers.
|
|
*
|
|
*/
|
|
|
|
typedef struct {
|
|
u_long iocsr; u_long fill_00[3]; /* I/O Control/Status */
|
|
u_long cerr1; u_long fill_01[3]; /* Cbus Error Register 1 */
|
|
u_long cerr2; u_long fill_02[3]; /* Cbus Error Register 2 */
|
|
u_long cerr3; u_long fill_03[3]; /* Cbus Error Register 3 */
|
|
u_long pcierr1; u_long fill_04[3]; /* PCI Error Register 1 */
|
|
u_long pcierr2; u_long fill_05[3]; /* PCI Error Register 2 */
|
|
u_long pciscr; u_long fill_06[3]; /* PCI Special Cycle */
|
|
u_long hae0_1; u_long fill_07[3]; /* High Address Extension 1 */
|
|
u_long hae0_2; u_long fill_08[3]; /* High Address Extension 2 */
|
|
u_long hbase; u_long fill_09[3]; /* PCI Hole Base */
|
|
u_long wbase1; u_long fill_0a[3]; /* Window Base 1 */
|
|
u_long wmask1; u_long fill_0b[3]; /* Window Mask 1 */
|
|
u_long tbase1; u_long fill_0c[3]; /* Translated Base 1 */
|
|
u_long wbase2; u_long fill_0d[3]; /* Window Base 2 */
|
|
u_long wmask2; u_long fill_0e[3]; /* Window Mask 2 */
|
|
u_long tbase2; u_long fill_0f[3]; /* Translated Base 2 */
|
|
u_long tlbbr; u_long fill_10[3]; /* TLB by-pass */
|
|
u_long ivr; u_long fill_11[3]; /* IVR Passive Rels/Intr Addr (reserved on T3/T4) */
|
|
u_long hae0_3; u_long fill_12[3]; /* High Address Extension 3 */
|
|
u_long hae0_4; u_long fill_13[3]; /* High Address Extension 4 */
|
|
u_long wbase3; u_long fill_14[3]; /* Window Base 3 */
|
|
u_long wmask3; u_long fill_15[3]; /* Window Mask 3 */
|
|
u_long tbase3; u_long fill_16[3]; /* Translated Base 3 */
|
|
|
|
u_long rsvd1; u_long fill_16a[3]; /* unused location */
|
|
|
|
u_long tdr0; u_long fill_17[3]; /* tlb data register 0 */
|
|
u_long tdr1; u_long fill_18[3]; /* tlb data register 1 */
|
|
u_long tdr2; u_long fill_19[3]; /* tlb data register 2 */
|
|
u_long tdr3; u_long fill_1a[3]; /* tlb data register 3 */
|
|
u_long tdr4; u_long fill_1b[3]; /* tlb data register 4 */
|
|
u_long tdr5; u_long fill_1c[3]; /* tlb data register 5 */
|
|
u_long tdr6; u_long fill_1d[3]; /* tlb data register 6 */
|
|
u_long tdr7; u_long fill_1e[3]; /* tlb data register 7 */
|
|
u_long wbase4; u_long fill_1f[3]; /* Window Base 4 */
|
|
u_long wmask4; u_long fill_20[3]; /* Window Mask 4 */
|
|
u_long tbase4; u_long fill_21[3]; /* Translated Base 4 */
|
|
/*
|
|
* The following 4 registers are used to get to the ICIC chip
|
|
*/
|
|
u_long air; u_long fill_22[3]; /* Address Indirection register */
|
|
u_long var; u_long fill_23[3]; /* Vector access register */
|
|
u_long dir; u_long fill_24[3]; /* Data Indirection register */
|
|
u_long ice; u_long fill_25[3]; /* IC enable register Indirection register */
|
|
|
|
} t2_csr_t;
|