1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Commit Graph

65573 Commits

Author SHA1 Message Date
David E. O'Brien
45a7ac086f This commit was generated by cvs2svn to compensate for changes in r84865,
which included commits to RCS files with non-trunk default branches.
2001-10-13 01:47:52 +00:00
David E. O'Brien
ca8d09641f Import the extra bits needed to target IA-64, PowerPC, and sparc64.
(this is Binutils from the FSF 2.11 branch [checked out 19-July-2001])
2001-10-13 01:47:52 +00:00
Bruce A. Mah
28e80882c1 New release notes: arp(8) prints interface names, strnstr(3)/strcasestr(3),
sysinstall(8) can load KLDs.

Minor markup additions.
2001-10-13 00:33:40 +00:00
Jordan K. Hubbard
513cce4025 Add the ability to load klds from a floppy as part of the installation.
Submitted by:	"Daniel O'Connor" <doconnor@gsoft.com.au>
MFC after:	2 weeks
2001-10-12 22:39:02 +00:00
Bruce A. Mah
2bab9ad217 Re-order "Network Interface Support" section of release notes.
No other whitespace, markup, or content changes.
2001-10-12 22:07:09 +00:00
Mark Peek
5930786540 Add memory disk support to allow the boot process to proceed a bit further. 2001-10-12 20:02:50 +00:00
Mark Peek
f57f841372 Modify a virtual address check to allow use of the openfirmware callback
used by the PowerPC simulator (PSIM).
2001-10-12 19:55:04 +00:00
Mark Peek
03ea73346d Add standard calls to device_add_child() and root_bus_configure(). 2001-10-12 19:53:22 +00:00
Matthew Dillon
00a6f47f13 Finally fix the VM bug where a file whos EOF occurs in the middle of a page
would sometimes prevent a dirty page from being cleaned, even when synced,
resulting in the dirty page being re-flushed to disk every 30-60 seconds or
so, forever.  The problem is that when the filesystem flushes a page to
its backing file it typically does not clear dirty bits representing areas
of the page that are beyond the file EOF.  If the file is also mmap()'d and
a fault is taken, vm_fault (properly, is required to) set the vm_page_t->dirty
bits to VM_PAGE_BITS_ALL.  This combination could leave us with an uncleanable,
unfreeable page.

The solution is to have the vnode_pager detect the edge case and manually
clear the dirty bits representing areas beyond the file EOF.  The filesystem
does the rest and the page comes up clean after the write completes.

MFC after:	3 days
2001-10-12 18:17:34 +00:00
Matt Jacob
b03c6ed6e5 Traverse the list of network interfaces rather than use if_index- if_index is
not guaranteed to be dense with respect to the actual list of interfaces.
2001-10-12 18:04:44 +00:00
Mike Barcroft
42ab40e52d o Treat a buffer as a non-NUL terminated string, because the whois
server may not return a new line character on the final line.
o Remove the whois.networksolutions.com fallback code, which is no
  longer needed.
o Instead of determining a hostname by terminating it when we see
  whitespace, only allow hostname characters and terminate the string
  when it's not such a character.
o Add a small optimization in a for loop.

PR:		30968
Reviewed by:	-audit
MFC after:	4 days
2001-10-12 17:39:36 +00:00
Bruce A. Mah
e7c25bd2f6 Start to move to an alphabetical (rather than semi-chronological)
ordering on release notes items, in an attempt to bring some order
to a huge mess.  This commit covers the top-level "Userland"
section.

No other content, markup, or whitespace changes.
2001-10-12 17:29:22 +00:00
John Polstra
215e696b60 Correct the input/output/clobber specifications for the cpuid
instruction.  Stefan Keller <dres@earth.serd.org> noticed that CPU
identification was broken when compiled with -O2, and tracked it
down to the asm statement, which was storing values into memory
without specifying that memory was modified.  He submitted a patch
which added "memory" as a clobber, but I refined it further to
arrive at this version.

MFC after:	3 days
2001-10-12 16:49:28 +00:00
Thomas Moestl
84bcb99195 Add inthand_add() and inthand_remove() for use by the MD bus code and
some glue code.
2001-10-12 16:06:41 +00:00
Thomas Moestl
ccece9b5ff Fix some warnings. 2001-10-12 16:00:30 +00:00
Thomas Moestl
b6aaa482ef Save the floating point context to the right pcb in cpu_fork(), and add
an empty stub for is_physical_memory().
2001-10-12 15:58:48 +00:00
Thomas Moestl
c2f5c600c1 Make the NTOHL, NTOHS, HTONL and HTONS macros (which are nops on
sparc64) empty to avoid compiler warnings.
2001-10-12 15:55:45 +00:00
Thomas Moestl
5f19cf9309 Implement DELAY() using the %tick register. 2001-10-12 15:51:19 +00:00
Thomas Moestl
4bc38523ec Add pmap_kenter_flags(), which is used by MD bus code that will be
committed soon, add a stub form pmap_kenter_temporary(), and implement
pmap_extract() and pmap_kextract().
2001-10-12 15:49:51 +00:00
Bruce Evans
62601deb33 Fixed corruption of the vendor $Id$ to $FreeBSD$. Put $FreeBSD$ in
__FBSDID() and ifdefed away all vendor id stuff.

This file should never have left the vendor branch; it is now identical
with the vendor's version except for id fiddling.
2001-10-12 15:05:00 +00:00
Yaroslav Tykhiy
7a29d7da50 Don't let a user name in ftpd's proctitle
be mistaken for a status message.

PR:		misc/25217
MFC after:	7 days
2001-10-12 13:16:34 +00:00
Yaroslav Tykhiy
11342ab1d0 Be consistent about indent at least within one block of code. 2001-10-12 13:06:40 +00:00
Doug Rabson
cc6fae1156 Pass the correct trapframe pointer to fork_exit - sp is trapframe-16. 2001-10-12 11:50:09 +00:00
Doug Rabson
5b341f5baf If the faulting instruction is a cmpxchg, then isr.w and isr.r will both
be set. We need to check isr.w before isr.r so that we can correctly
handle a cmpxchg to a copy-on-write page.

This fixes the hang-after-fork problem for dynamically linked programs.
2001-10-12 11:49:11 +00:00
Poul-Henning Kamp
602150cc70 Set ulptusein = 0 so that the machine doesn't hang solid after a
printjob.

There is probably a better fix, but this at least makes USB printing
working again.
2001-10-12 11:05:58 +00:00
Thomas Gellekum
ff7926e949 Minor cleanup, no functional changes:
- Add/change some comments,
- remove superfluous `if (1||x)' and re-indent,
- fix initialization of floppyinfo[] to get rid of warning.
2001-10-12 10:31:00 +00:00
Yaroslav Tykhiy
3a10201f01 Fix a small style slip: Files in /dev are not
devices theirselves, but device nodes.
2001-10-12 10:09:36 +00:00
Peter Pentchev
88fbb423d4 Remove the panic when trying to register a sysctl with an oid too high.
This stops panics on unloading modules which define their own sysctl sets.

However, this also removes the protection against somebody actually
defining a static sysctl with an oid in the range of the dynamic ones,
which would break badly if there is already a dynamic sysctl with
the requested oid.

Apparently, the algorithm for removing sysctl sets needs a bit more work.
For the present, the panic I introduced only leads to Bad Things (tm).

Submitted by:	many users of -current :(
Pointy hat to:	roam (myself) for not testing rev. 1.112 enough.
2001-10-12 09:16:36 +00:00
Jordan K. Hubbard
27a550e5ed DTRT in the restart case 2001-10-12 07:36:34 +00:00
Matt Jacob
6b89c0be2e roll out last change 2001-10-12 02:30:53 +00:00
Dag-Erling Smørgrav
3d4630a415 Write a real man page. 2001-10-12 02:06:34 +00:00
John Baldwin
a2f2b3afcd - Catch up to the new ucred API.
- Add proc locking to the jail() syscall.  This mostly involved shuffling
  a few things around so that blockable things like malloc and copyin
  were performed before acquiring the lock and checking the existing
  ucred and then updating the ucred as one "atomic" change under the proc
  lock.
2001-10-11 23:39:43 +00:00
John Baldwin
bd78cece5d Change the kernel's ucred API as follows:
- crhold() returns a reference to the ucred whose refcount it bumps.
- crcopy() now simply copies the credentials from one credential to
  another and has no return value.
- a new crshared() primitive is added which returns true if a ucred's
  refcount is > 1 and false (0) otherwise.
2001-10-11 23:38:17 +00:00
John Baldwin
698166ca55 Whitespace fixes. 2001-10-11 22:49:27 +00:00
John Baldwin
6a90c862d3 Rework some code to be a bit simpler by inverting a few tests and using
else clauses instead of goto's.
2001-10-11 22:48:37 +00:00
Matt Jacob
5aa8fe17f8 Fix declaration disagreement. 2001-10-11 22:02:14 +00:00
Bruce A. Mah
6af023343d New release note: isp(4) Qlogic 2300 support. For some reason this didn't
get committed along with its accompanying hardware note entry.
2001-10-11 21:48:35 +00:00
Matt Jacob
cbedf1aa6f Remove the hiding of some prototype declarations. 2001-10-11 21:48:02 +00:00
Matt Jacob
abafa9b9aa remove unused variable declaration 2001-10-11 21:47:27 +00:00
David E. O'Brien
14a4ecde9e We use proc_rwmem (with the correct number of args) rather than procfs_domem
in the new world order or procfs.

Submitted by:	des
2001-10-11 21:17:31 +00:00
Jonathan Lemon
d2b4566aa6 Fix the ``WARNING: Driver mistake: repeat make_dev'', caused by using
the wrong index variable within a loop.  I have no idea how this managed
to work on my test box.

Spotted by: fenner
2001-10-11 18:39:05 +00:00
Matt Jacob
458c32f2e8 Note that PROCFS is mandatory at this time- until we fix the
ptrace code to not call things directly from procfs we can't
very well have procfs be a module.
2001-10-11 18:36:41 +00:00
John Baldwin
fa78c35ad2 Oops, these already included sys/lock.h, they just did so after
sys/mutex.h which is too late.
2001-10-11 18:25:57 +00:00
John Baldwin
61d80e90a9 Add missing includes of sys/ktr.h. 2001-10-11 17:53:43 +00:00
John Baldwin
7106ca0d1a Add missing includes of sys/lock.h. 2001-10-11 17:52:20 +00:00
Mike Barcroft
43e13bf58f Note that strncmp() will not compare characters after a NUL character.
Add a missing word.  Bump document date.

Inspired by:	IEEE Std 1003.1-200x (Draft 7)
MFC after:	3 days
2001-10-11 17:02:44 +00:00
Mike Barcroft
a9227c40eb Clarify that strnstr() will stop searching after in encounters a NUL
character.  Bump document date.  Add a missing comma.
2001-10-11 15:49:06 +00:00
Bruce A. Mah
56ccbf72ac Move two misplaced release notes to the correct location. 2001-10-11 15:38:48 +00:00
Bruce A. Mah
5b2f237ee0 MFCs noted: amdpm(4), new newfs(8) cylinder group defaults. 2001-10-11 15:37:26 +00:00
Ruslan Ermilov
506d9c18e9 - Bump document date for eaccess(2) addition.
- Mention ``eaccess'' in the NAME section.
- Use intro(2) terminology.
- Markup fixes.

Reviewed by:	rwatson
2001-10-11 15:27:53 +00:00