* Add resize callbacks for upcoming table-based algorithms.
Kernel changes:
* s/ipfw_modify_table/ipfw_manage_table_ent/
* Simplify add_table_entry(): make table creation a separate piece of code.
Do not perform creation if not in "compat" mode.
* Add ability to perform modification of algorithm state (like table resize).
The following callbacks were added:
- prepare_mod (allocate new state, without locks)
- fill_mod (UH_WLOCK, copy old state to new one)
- modify (UH_WLOCK + WLOCK, switch state)
- flush_mod (no locks, flushes allocated data)
Given callbacks are called if table modification has been requested by add or
delete callbacks. Additional u64 tc->'flags' field was added to pass these
requests.
* Change add/del table ent format: permit adding/removing multiple entries
at once (only 1 supported at the moment).
Userland changes:
* Auto-create tables with warning
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
The free space value in the FSInfo block is merely unitialized when it is
0xffffffff. This fixes a bug found in NetBSD.
It must be noted that we never supported all the checks that NetBSD does
as some of them would cause failures with a freshly created FAT32
from MS-Windows.
While here, bring some space fixes.
Obtained from: NetBSD (rev. 1.22)
MFC after: 3 days
* Switch kernel to use per-cpu counters for rules.
* Keep ABI/API.
Kernel changes:
* Each rules is now exported as TLV with optional extenable
counter block (ip_fW_bcounter for base one) and
ip_fw_rule for rule&cmd data.
* Counters needs to be explicitly requested by IPFW_CFG_GET_COUNTERS flag.
* Separate counters from rules in kernel and clean up ip_fw a bit.
* Pack each rule in IPFW_TLV_RULE_ENT tlv to ease parsing.
* Introduce versioning in container TLV (may be needed in future).
* Fix ipfw_cfg_lheader broken u64 alignment.
Userland changes:
* Use set_mask from cfg header when requesting config
* Fix incorrect read accouting in ipfw_show_config()
* Use IPFW_RULE_NOOPT flag instead of playing with _pad
* Fix "ipfw -d list": do not print counters for dynamic states
* Some small fixes
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Kernel changes:
* Change dump format for dynamic states:
each state is now stored inside ipfw_obj_dyntlv
last dynamic state is indicated by IPFW_DF_LAST flag
* Do not perform sooptcopyout() for !SOPT_GET requests.
Userland changes:
* Introduce foreach_state() function handler to ease work
with different states passed by ipfw_dump_config().
* Bump table dump format preserving old ABI.
Kernel size:
* Add IP_FW_TABLE_XFIND to handle "lookup" request from userland.
* Add ta_find_tentry() algorithm callbacks/handlers to support lookups.
* Fully switch to ipfw_obj_tentry for various table dumps:
algorithms are now required to support the latest (ipfw_obj_tentry) entry
dump format, the rest is handled by generic dump code.
IP_FW_TABLE_XLIST opcode version bumped (0 -> 1).
* Eliminate legacy ta_dump_entry algo handler:
dump_table_entry() converts data from current to legacy format.
Userland side:
* Add "lookup" table parameter.
* Change the way table type is guessed: call table_get_info() first,
and check value for IPv4/IPv6 type IFF table does not exist.
* Fix table_get_list(): do more tries if supplied buffer is not enough.
* Sparate table_show_entry() from table_show_list().
partitions of types other than "freebsd-boot" (in particular, "efi").
This allows the removal of some nasty hacks for supporting PowerPC systems,
in particular aliasing freebsd-boot to apple-boot on APM and an IBM-specific
code on MBR.
This changes the installer to use the correct names, which also breaks a
degeneracy in the meaning of "freebsd-boot" that allows the addition
of support for some newer IBM systems that can boot from GPT in addition to
MBR. Since I have no idea how to detect which those systems are, leave
the default on IBM PPC systems as MBR for now.
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.
sbin/camcontrol/Makefile:
Add persist.c.
sbin/camcontrol/persist.c:
New persistent reservation support for camcontrol(8).
We have support for all known operation modes for PERSISTENT RESERVE
IN and PERSISTENT RESERVE OUT.
exceptions noted above.
sbin/camcontrol/camcontrol.8:
Document the new 'persist' subcommand.
In the section on the Transport ID (-I) option, explain what
Transport IDs for each protocol should look like. At some point
some of this information could probably get moved off in a
separate man page, either on Transport IDs alone or a man page
documenting the Transport ID parsing code.
Add a number of examples of persistent reservation commands.
Persistent Reservations are complex enough that the average user
probably won't be able to get the commands exactly right by just
reading the man page. These examples show a few basic and
advanced examples of how to use persistent reservations.
sbin/camcontrol/camcontrol.h:
Move the definition for camcontrol_optret here, so we can use it
for the persistent reservation code.
Add a definition for the new scsipersist() function.
sbin/camcontrol/camcontrol.c:
Add 'persist' to the list of subcommands.
Document 'persist' in the help text.
sys/cam/scsi/scsi_all.c:
Add the scsi_persistent_reserve_in() and
scsi_persistent_reserve_out() CCB building functions.
Add a new function, scsi_transportid_sbuf(). This takes a
SCSI Transport ID (documented in SPC-4), and prints it to
an sbuf(9). There are some transports (like ATA, USB, and
SSA) for which there is no transport defined. We need to
come up with a reasonable thing to do if we're presented
with a Transport ID that claims to be for one of those
protocols.
Add new routines scsi_get_nv() and scsi_nv_to_str().
These functions do a table lookup to go between a string and an
integer. There are lots of table lookups needed in the
persistent reservation code in camcontrol(8).
Add a new function, scsi_parse_transportid(), along with leaf node
functions to parse:
FC, 1394 and SAS (scsi_parse_transportid_64bit())
iSCSI (scsi_parse_transportid_iscsi())
SPI (scsi_parse_transportid_spi())
RDMA (scsi_parse_transportid_rdma())
PCIe (scsi_parse_transportid_sop())
Transport IDs. Given a string with the general form proto,id these
functions create a SCSI Transport ID structure.
sys/cam/scsi/scsi_all.h:
Update the various persistent reservation data structures to
SPC4r36l, but also rename some fields that were previously
obsolete with the proper names from older SCSI specs. This
allows using older, obsolete persistent reservation types when
desired.
Add function prototypes for the new persistent reservation CCB
building functions.
Add a data strucure for the READ FULL STATUS service action
of the PERSISTENT RESERVE IN command.
Add Transport ID structures for all protocols described in SPC-4.
Add a new series of SCSI_PROTO_XXX definitions, and
redefine other defines in terms of these new definitions.
Add a prototype for scsi_transportid_sbuf().
Change a couple of "obsolete" persistent reservation data
structure fields into something more meaningful, based on
what the field was called when it was defined in the spec.
(e.g. SPC, SPC-2, etc.)
Create a new define, SPRI_MAX_LEN, for the maximum allocation
length allowed for the PERSISTENT RESERVE IN command.
Add data structures and enumerations for the new name/value
translation functions.
Add data structures for SCSI over PCIe Routing IDs.
Bring the PERSISTENT RESERVE OUT Register and Move parameter list
structure (struct scsi_per_res_out_parms) up to date with SPC-4.
Add a data structure for the transport IDs that can optionally be
appended to the basic PERSISTENT RESERVE OUT parameter list.
Move SCSI protocol macro definitions out of the VPD page 0x83
definition and combine them with the more up to date protocol
definitions higher in the file.
Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
scsi_parse_transportid_sop(), and scsi_parse_transportid().
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables
Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
Kernel changes:
* change base TLV header to be u64 (so size can be u32).
* Introduce ipfw_obj_ctlv generc container TLV.
* Add IP_FW_XGET opcode which is now used for atomic configuration
retrieval. One can specify needed configuration pieces to retrieve
via flags field. Currently supported are
IPFW_CFG_GET_STATIC (static rules) and
IPFW_CFG_GET_STATES (dynamic states).
Other configuration pieces (tables, pipes, etc..) support is planned.
Userland changes:
* Switch ipfw(8) to use new IP_FW_XGET for rule listing.
* Split rule listing code get and show pieces.
* Make several steps forward towards libipfw:
permit printing states and rules(paritally) to supplied buffer.
do not die on malloc/kernel failure inside given printing functions.
stop assuming cmdline_opts is global symbol.
* Use one u16 from op3 header to implement opcode versioning.
* IP_FW_TABLE_XLIST has now 2 handlers, for ver.0 (old) and ver.1 (current).
* Every getsockopt request is now handled in ip_fw_table.c
* Rename new opcodes:
IP_FW_OBJ_DEL -> IP_FW_TABLE_XDESTROY
IP_FW_OBJ_LISTSIZE -> IP_FW_TABLES_XGETSIZE
IP_FW_OBJ_LIST -> IP_FW_TABLES_XLIST
IP_FW_OBJ_INFO -> IP_FW_TABLE_XINFO
IP_FW_OBJ_INFO -> IP_FW_TABLE_XFLUSH
* Add some docs about using given opcodes.
* Group some legacy opcode/handlers.
Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)
Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes
Kernel-side changelog:
* Split general tables code and algorithm-specific table data.
Current algorithms (IPv4/IPv6 radix and interface tables radix) moved to
new ip_fw_table_algo.c file.
Tables code now supports any algorithm implementing the following callbacks:
+struct table_algo {
+ char name[64];
+ int idx;
+ ta_init *init;
+ ta_destroy *destroy;
+ table_lookup_t *lookup;
+ ta_prepare_add *prepare_add;
+ ta_prepare_del *prepare_del;
+ ta_add *add;
+ ta_del *del;
+ ta_flush_entry *flush_entry;
+ ta_foreach *foreach;
+ ta_dump_entry *dump_entry;
+ ta_dump_xentry *dump_xentry;
+};
* Change ->state, ->xstate, ->tabletype fields of ip_fw_chain to
->tablestate pointer (array of 32 bytes structures necessary for
runtime lookups (can be probably shrinked to 16 bytes later):
+struct table_info {
+ table_lookup_t *lookup; /* Lookup function */
+ void *state; /* Lookup radix/other structure */
+ void *xstate; /* eXtended state */
+ u_long data; /* Hints for given func */
+};
* Add count method for namedobj instance to ease size calculations
* Bump ip_fw3 buffer in ipfw_clt 128->256 bytes.
* Improve bitmask resizing on tables_max change.
* Remove table numbers checking from most places.
* Fix wrong nesting in ipfw_rewrite_table_uidx().
* Add IP_FW_OBJ_LIST opcode (list all objects of given type, currently
implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_LISTSIZE (get buffer size to hold IP_FW_OBJ_LIST data,
currenly implemented for IPFW_OBJTYPE_TABLE).
* Add IP_FW_OBJ_INFO (requests info for one object of given type).
Some name changes:
s/ipfw_xtable_tlv/ipfw_obj_tlv/ (no table specifics)
s/ipfw_xtable_ntlv/ipfw_obj_ntlv/ (no table specifics)
Userland changes:
* Add do_set3() cmd to ipfw2 to ease dealing with op3-embeded opcodes.
* Add/improve support for destroy/info cmds.
* Add namedobject set-aware api capable of searching/allocation objects by their name/idx.
* Switch tables code to use string ids for configuration tasks.
* Change locking model: most configuration changes are protected with UH lock, runtime-visible are protected with both locks.
* Reduce number of arguments passed to ipfw_table_add/del by using separate structure.
* Add internal V_fw_tables_sets tunable (set to 0) to prepare for set-aware tables (requires opcodes/client support)
* Implement typed table referencing (and tables are implicitly allocated with all state like radix ptrs on reference)
* Add "destroy" ipfw(8) using new IP_FW_DELOBJ opcode
Namedobj more detailed:
* Blackbox api providing methods to add/del/search/enumerate objects
* Statically-sized hashes for names/indexes
* Per-set bitmask to indicate free indexes
* Separate methods for index alloc/delete/resize
Basically, there should not be any user-visible changes except the following:
* reducing table_max is not supported
* flush & add change table type won't work if table is referenced
Sponsored by: Yandex LLC
This partitioning scheme is used in DragonFlyBSD. It is similar to
BSD disklabel, but has the following improvements:
* metadata has own dedicated place and isn't accessible through partitions;
* all offsets are 64-bit;
* supports 16 partitions by default (has reserved place for more);
* has reserved place for backup label (but not yet implemented);
* has UUIDs for partitions and partition types;
No objections from: geom
MFC after: 2 weeks
Relnotes: yes
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is
retained for backwards-compatibility with existing clients.
Sponsored by: Spectra Logic
Note that the -c argument's parameter is compared against the digest of
the file, not the file. [1]
Update the "current time" parentheticals for notes about reversing
and colliding the hash functions. [1]
Some general mdoc updates.
PR: docs/188043 [1]
Submitted by: Jamie Landeg-Jones [1]
Approved by: hrs (mentor)
MFC after: 1 week
Add `flags` u16 field to the hole in ipfw_table_xentry structure.
Kernel has been guessing address family for supplied record based
on xent length size.
Userland, however, has been getting fixed-size ipfw_table_xentry structures
guessing address family by checking address by IN6_IS_ADDR_V4COMPAT().
Fix this behavior by providing specific IPFW_TCF_INET flag for IPv4 records.
PR: bin/189471
Submitted by: Dennis Yusupoff <dyr@smartspb.net>
MFC after: 2 weeks
Since radix has been ignoring sa_family in passed sockaddrs,
no one ever has bothered filling valid sa_family in netmasks.
Additionally, radix adjusts sa_len field in every netmask not to
compare zero bytes at all.
This leads us to rt_mask with sa_family of AF_UNSPEC (-1) and
arbitrary sa_len field (0 for default route, for example).
However, rtsock have been passing that rt_mask intact for ages,
requiring all rtsock consumers to make ther own local hacks.
We even have unfixed on in base:
do `route -n monitor` in one window and issue `route -n get addr`
for some directly-connected address. You will probably see the following:
got message of size 304 on Thu May 8 15:06:06 2014
RTM_GET: Report Metrics: len 304, pid: 30493, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
10.0.0.0 link#1 (255) ffff ffff ff em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^
after the change:
got message of size 312 on Thu May 8 15:44:07 2014
RTM_GET: Report Metrics: len 312, pid: 2895, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
10.0.0.0 link#1 255.255.255.0 em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^
Sponsored by: Yandex LLC
MFC after: 1 month
- Fix typos preventing -f to actually work with the create command.
- Initialize flags to zero rather than using stack garbage when handling
the grow command.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
PR: bin/187551
MFC after: 3 days
Sponsored by: Spectra Logic
FAT12 1..4084
FAT16 4085..65524
FAT32 65525..
This is required for interoperability with other FAT implementations,
and in particular UEFI.
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
After r263152 this leaves unused variables if route(8) is compiled
without INET support.
Switch the remaining variable accesses to flags and remove now obsolete
variables.
Reviewed by: glebius
MFC after: 1 week
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
from clang about possible keywords being treated as identifiers for the
remainder of the translation unit (a.k.a. -Wkeyword-compat), when using
libstdc++ in combination with -Wsystem-headers. This will not only fix
devd, but any C++ program using libstdc++.
MFC after: 3 days
X-MFC-With: r263694
and -Wsystem-headers enabled (which is the default for any non-zero
WARNS level, crazily enough!). This is primarily meant to be MFC'd as
soon as possible.
MFC after: 3 days
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
sbin/devd/devd.cc
Add a -q flag to devd that will suppress syslog logging at
LOG_NOTICE or below.
Requested by: ian@ and imp@
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
race prone. Some just gather statistics, but some are later used in
different calculations.
A real problem was the race provoked underflow of the states_cur counter
on a rule. Once it goes below zero, it wraps to UINT32_MAX. Later this
value is used in pf_state_expires() and any state created by this rule
is immediately expired.
Thus, make fields states_cur, states_tot and src_nodes of struct
pf_rule be counter(9)s.
Thanks to Dennis for providing me shell access to problematic box and
his help with reproducing, debugging and investigating the problem.
Thanks to: Dennis Yusupoff <dyr smartspb.net>
Also reported by: dumbbell, pgj, Rambler
Sponsored by: Nginx, Inc.
fsck, the latter does not accept the referred to "-b" flag.
This change was accidently committed directly to 9-STABLE in
r237505.
PR: 82720
Submitted by: David D.W. Downey
MFC after: 1 week
The tracking generated warnings when the line number of an existing tty in
/etc/ttys changed, which would corrupt utmp (as it was indexed by the line
number). With utmpx, the line number no longer matters, so the tracking is
no longer needed.
network packets that we parse and not against local users trying to gain root
access through ping's set-uid bit - this is handled by dropping privileges very
early in ping.
Submitted by: Mikhail <mp@lenta.ru>
GB to improve granularity of the reporting - especially for namespaces
that are on the order of 1 or 2 GB.
Submitted by: Tony Beltran <anthony.beltran@emc.com>
MFC after: 3 days
errors have been detected in a particular run.
Clean up the global state variables so that a restart can happen correctly.
Separate the global variables in fsck_ffs and fsdb to their own file. This
fixes header sharing with fscd.
Correctly initialize, static-ize, and remove global variables as needed in
dir.c. This fixes a problem with lost+found directories that was causing
a segfault.
Correctly initialize, static-ize, and remove global variables as needed in
suj.c.
Initialize the suj globals before allocating the disk object, not after.
Also ensure that 'preen' mode doesn't conflict with 'restart' mode
Submitted by: scottl, max
Reviewed by: max, mckusick (earlier version)
Obtained from: Netflix
MFC after: 3 days
This fixes the problem, when gmirror starts again just after stop.
The problem occurs when gmirror's component has geom label with equal size.
E.g. gpt and gptid have the same size as partition, diskid has the same
size as entire disk. When gmirror's geom has been destroyed, glabel
creates its providers and this initiate retaste.
Now "gmirror destroy" command is available. It destroys geom and also
erases gmirror's metadata.
MFC after: 2 weeks
INET6 socket when needed to allow pfctl to work on noinet and noinet6
kernels (and try to provide a fallback using AF_LINK as best effort).
Adjust the Makefile to also respect relevant src.conf(5) options
for compile time decisions on INET and INET6 support.
Reviewed by: glebius (no objections)
MFC after: 1 week
re-links dynamic states to default rule instead of
flushing on rule deletion.
This can be useful while performing ruleset reload
(think about `atomic` reload via changing sets).
Currently it is turned off by default.
MFC after: 2 weeks
Sponsored by: Yandex LLC
Promoting the SIGINFO handler's log message from LOG_INFO to
LOG_NOTICE, and promoting the "Processing event ..." message from
LOG_DEBUG to LOG_INFO. Setting the logfile to LOG_NOTICE with this
change will have the same result as setting it to LOG_INFO without
this change. Setting it to LOG_INFO with this change will include
the useful "Processing event ..." messages that were previously at
LOG_DEBUG, without including useless messages like "Pushing table".
The intent of this change is that one can log "Processing event ..."
without logging "Pushing table" and related messages that are sent
for every event. The number of lines actually logged is reduced by
about 75% by making this change and setting syslog to LOG_INFO vs
setting syslog to LOG_DEBUG.
etc/syslog.conf
Changing the recommended loglevel to notice instead of info.
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
Increase the size of devd's client socket's send buffer from the
default (8k) to 128k. This prevents clients from getting
POLLHUPped during event storms. For example, during zpool creation,
the kernel emits a resource.fs.zfs.statechange event for every vdev
in the pool. A 128k buffer is large enough to hold the statechange
events for a pool with nearly 800 drives.
Reviewed by: ian, imp
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
is actually sent by the remote node).
Otherwise it generated confusing "Negotiated protocol version 1" debug
messages when processing the second connection.
MFC after: 2 weeks
request back from the receive queue -- it might already be processed
by remote_recv_thread, which lead to crashes like below:
(primary) Unable to receive reply header: Connection reset by peer.
(primary) Unable to send request (Connection reset by peer):
WRITE(954662912, 131072).
(primary) Disconnected from kopusha:7772.
(primary) Increasing localcnt to 1.
(primary) Assertion failed: (old > 0), function refcnt_release,
file refcnt.h, line 62.
Taking the request back was not necessary (it would properly be
processed by the remote_recv_thread) and only complicated things.
MFC after: 2 weeks
indication when a request can be moved to done queue, but also for
detecting the current state of memsync request.
This approach has problems, e.g. leaking a request if memsynk ack from
the secondary failed, or racy usage of write_complete, which should be
called only once per write request, but for memsync can be entered by
local_send_thread and ggate_send_thread simultaneously.
So the following approach is implemented instead:
1) Use hio_countdown only for counting components we waiting to
complete, i.e. initially it is always 2 for any replication mode.
2) To distinguish between "memsync ack" and "memsync fin" responses
from the secondary, add and use hio_memsyncacked field.
3) write_complete() in component threads is called only before
releasing hio_countdown (i.e. before the hio may be returned to the
done queue).
4) Add and use hio_writecount refcounter to detect when
write_complete() can be called in memsync case.
Reported by: Pete French petefrench ingresso.co.uk
Tested by: Pete French petefrench ingresso.co.uk
MFC after: 2 weeks
This will make it easier to link as a library.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on: -hackers
This will make it easier to link as a library.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on: -hackers
This will make it easier to link as a library.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on: -hackers
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
only being able to create 1TB partitions:
o) Use an unsigned 32-bit quantity to store the number of disk sectors.
o) Detect overflow of said 32-bit quantity and clamp to 2^32.
o) Rather than returning the disk sector count from get_params, return 0 on
success, since its return value is only ever compared to -1 to detect
failure. This would cause returning 2^32 sectors to be interpreted as an
error.
Reviewed by: bde ("good for a quick fix")
Print warning for IPv4 address strings which are valid in
inet_aton() but not valid in inet_pton(). (1)
Found by: Özkan KIRIK <ozkan.kirik@gmail.com>
Submitted by: Ian Smith <smithi@nimnet.asn.au> (1)
MFC after: 2 weeks
Sponsored by: Yandex LLC
Now it is easy to expand the size of the mirror when all its components
are replaced. Also add g_resize method to geom_mirror class. It will write
updated metadata to new last sector, when parent provider is resized.
Silence from: geom@
MFC after: 1 month
signifying that a reboot is required to complete activation
of the requested firmware image.
Reported by: Joe Golio <joseph.golio@emc.com>
Sponsored by: Intel
MFC after: 3 days
manual page:
There is no need to call arc4random_stir() before using
arc4random() functions family, since they automatically
initialize themselves.
No objection: des
MFC after: 2 weeks
Original log:
pfctl -ss printed state levels for ICMPv6. Disable this the same
way it has already been done for ICMPv4.
Difference with OpenBSD:
- WITHOUT_INET6 safe
Obtained from: OpenBSD
when -u is specified it is not...
update the docs to say that you can use full device names w/ -u, and
update the examples...
Submitted by: #vbsdcon
MFC after: 3 days
This is believed to fix hastd crashes, which might occur during
synchronization, triggered by the failed assertion:
Assertion failed: (amp->am_memtab[ext] > 0),
function activemap_write_complete, file activemap.c, line 351.
MFC after: 1 week
1. "-u N" specified, no -f, and mdN found,
2. no -u, "-f /pathname" specified, and mdN associated with /pathname found,
3. "-u N" specified, "-f /pathname" specified, and both of them found,
4. "-l" specified and no -f,
5. "-l" specified, "-f /pathname" specified, and /pathname found.
otherwise return -1.
Spotted by: Julian H. Stacey
di_extsize is the EA size and as such it should be unsigned.
Adjust related types for consistency.
Reviewed by: mckusick (previous version)
MFC after: 3 weeks
Always validate the return of find_geomcfg(). It could be NULL, for
example when the geom is withering.
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corporation
MFC after: 3 weeks
with CARP.
Currently, we've got a problem that interface isn't IFF_UP at the time
we assign it a redundant address, and the latter gets stuck in INIT state.
Additional SIOCSIFFLAGS from ifconfig(8) kicks it to a working state.
A proper fix is kernel side and appeared to be non-trivial, not to be
checked in before 10.0-RELEASE.
Submitted by: Ole Myhre <ole.myhre dataoppdrag.no>
already belongs or removing it from a group to which it does not
belong. This makes it possible to include group memberships in
ifconfig_foo0 in rc.conf without fear of breaking "service netif
restart foo0".
MFC after: 3 days
that it's being used by both initiators, and change the title to make
it more easily searchable.
Approved by: re (glebius)
Sponsored by: FreeBSD Foundation
when calculating stats in nvmecontrol perftest.
Sponsored by: Intel
Reported by: Joe Golio <joseph.golio@emc.com>
Reviewed by: carl
Approved by: re (hrs)
MFC after: 1 week
kept dirty to reduce the number of on-disk metadata updates. The
sequence of operations is:
1) acquire the activemap lock;
2) update in-memory map;
3) if the list of keepdirty extents is changed, update on-disk metadata;
4) release the lock.
On-disk updates are not frequent in comparison with in-memory updates,
while require much more time. So situations are possible when one
thread is updating on-disk metadata and another one is waiting for the
activemap lock just to update the in-memory map.
Improve this by introducing additional, on-disk map lock: when
in-memory map is updated and it is detected that the on-disk map needs
update too, the on-disk map lock is acquired and the on-memory lock is
released before flushing the map.
Reported by: Yamagi Burmeister yamagi.org
Tested by: Yamagi Burmeister yamagi.org
Reviewed by: pjd
Approved by: re (marius)
MFC after: 2 weeks
waiting on an empty queue as the queue may have several consumers.
Before the fix the following scenario was possible: 2 threads are
waiting on empty queue, 2 threads are inserting simultaneously. The
first inserting thread detects that the queue is empty and is going to
send the signal, but before it sends the second thread inserts
too. When the first sends the signal only one of the waiting threads
receive it while the other one may wait forever.
The scenario above is is believed to be the cause of the observed
cases, when ggate_recv_thread() was getting stuck on taking free
request, while the free queue was not empty.
Reviewed by: pjd
Tested by: Yamagi Burmeister yamagi.org
Approved by: re (marius)
MFC after: 2 weeks
The fields from deMTime and deMDate in the DOS directory entry
are actually the last-modified time/date.
According to some online documentation these are the only
timestamps available in FAT12/FAT16.
MFC after: 3 days
