With the introduction of M_EXEC support for kmem_malloc(), some kernel
mappings start having NX bit set in the paging structures early, for
PAE kernels on machines with NX support, i.e. practically on all
machines. In particular, AP trampoline and initialization needs to
access pages which translations has NX bit set, before initializecpu()
is called.
Check for CPUID NX feature and enable EFER.NXE before we enable paging
in mp boot trampoline. This allows the CPU to use the kernel page
table instead of generating page fault due to reserved bit set.
PR: 233819
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Use the newly defined SRAT/SLIT parsing APIs in arm64 to support
ACPI based NUMA.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D17943
ACPI SRAT table on arm64 uses GICC entries to provide CPU locality
information. These entries use an AcpiProcessorUid to identify the
CPU (unlike on x86 where the entries have an APIC ID).
Update acpi_pxm.c to extend the cpu_add/cpu_find/cpu_get_info
functions to handle AcpiProcessorUid. Use the updated functions
while parsing ACPI_SRAT_GICC_AFFINITY entry for arm64.
Also update sys/conf/files.arm64 to build acpi_pxm.c when ACPI is
enabled.
Reviewed by: markj (previous version)
Differential Revision: https://reviews.freebsd.org/D17942
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
The SLIT and SRAT ACPI tables needs to be parsed on arm64 as well, on
systems that use UEFI/ACPI firmware and support NUMA. To do this, we
need to move most of the logic of x86/acpica/srat.c to dev/acpica and
provide an API that architectures can use to parse and configure ACPI
NUMA information.
This commit adds the API in srat.c as a first step, without making any
functional changes. We will move the common code to sys/dev/acpica
as the next step.
The functions added are:
* int acpi_pxm_init(int ncpus, vm_paddr_t maxphys) - to allocate and
initialize data structures used
* void acpi_pxm_parse_tables(void) - parse SRAT/SLIT, save the cpu and
memory proximity information
* void acpi_pxm_set_mem_locality(void) - use the saved data to set
memory locality
* void acpi_pxm_set_cpu_locality(void) - use the saved data to set cpu
locality
* void acpi_pxm_free(void) - free data structures allocated by init
On arm64, we do not have an cpu APIC id that can be used as index to
store CPU data, we need to use the Processor Uid. To help with this,
define internal functions cpu_add, cpu_find, cpu_get_info to store
and get CPU proximity information.
Reviewed by: markj, jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D17940
Although these are slightly obsolete in favor of R_AARCH64_TLSDESC,
gcc -mtls-dialect=trad still use them.
Please note that definition of TLS_DTPMOD64 and TLS_DTPREL64 are incorrectly
exchanged in GNU binutils. TLS_DTPREL64 should be encoded to 1028 (as is
defined in ARM ELF ABI) but binutils encode it to 1029. And vice versa,
TLS_DTPMOD64 should be encoded to 1029 but binutils encode it to 1028.
While I'm in, add also R_AARCH64_NONE. It can be produced as result of linker
relaxation.
MFC after: 1 week
Validate the value of the -l argument (packet length) against the MTU of the netmap port.
In case the netmap port does not refer to a physical interface (e.g. VALE port or pipe), then
the netmap buffer size is used as MTU.
This change also sets a better default value for the -M option, so that pkt-gen uses
the largest possible fragments in case of multi-slot packets.
Differential Revision: https://reviews.freebsd.org/D18436
If all IDs from trypid to pid_max were used as pids, the code would enter
a loop which would be infinite if none of the IDs could become free (e.g.
they all belong to processes which did not transitioned to zombie).
Fixes: r341684 ("Manage process-related IDs with bitmaps")
Sponsored by: The FreeBSD Foundation
kqueue would always relock immediately afterwards.
While here drop the NULL check for list itself. The list is
always allocated.
Sponsored by: The FreeBSD Foundation
Originally read value is still safely kept. Re-reading code was there
for previous iterations which were partially shared with i386.
Sponsored by: The FreeBSD Foundation
When we detected that the vnode is not symlink, return immediately.
This moves the readlink code out of else branch and unindents it.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Braces were put in the wrong place, causing failing EAGAIN check to
return zero result. Remove the problematic assignment from the
conditional expression at all.
While there, remove used once variable vp, and wrap too long line.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- buf_to_iov() does not use buflen parameter, allowing out of bound read.
- buf_to_iov() leaks memory if seek argument > 0.
- iov_to_buf() doesn't need to reallocate buffer for every segment.
- there is no point to use size_t for iov counts, int is more then enough.
- some iov function arguments can be constified.
- pci_vtscsi_request_handle() used truncate_iov() incorrectly, allowing
getting out of buffer and possibly corrupting data.
- pci_vtscsi_controlq_notify() written returned status at wrong offset.
- pci_vtscsi_controlq_notify() leaked one buffer per event.
Reported by: wg
Reviewed by: araujo
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18465
Unfortunately ctl_scsi_zero_io() wipes that field, so it was always zero.
While there, targ_port is set by kernel, so user-space should not fill it.
MFC after: 1 week
Because of that typo the driver would try to attach to every device
on acpi bus. That disrupted acpi attachment of uart driver, at least.
MFC after: 4 days
X-MFC with: r339754
This adds more detail and fixes some inaccuracies.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18463
Add a subroutine for updating satp, for use when updating the
active pmap. No functional change intended.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18462
The kernel was already doing this prior to r329615. It was changed
to reduce contention on allproc. However, introduction of pidhash
locks and removal of proctree -> allproc ordering from fork thanks
to bitmaps fixed things enough to make this change pessimal.
waitpid takes proctree on each call and this change (now) causes
avoidable stalls if allproc is held.
Sponsored by: The FreeBSD Foundation
Currently unique pid allocation on fork often requires a full walk of
process, group, session lists to make sure it is not used by anything.
This has a side effect of requiring proctree to be held along with allproc,
which adds more contention in poudriere -j 128.
The patch below implements trivial bitmaps which gets rid of the problem.
Dedicated lock is introduced to manage IDs.
While here a bug was discovered: all processes would inherit reap id from
the first process spawned by init. This had a side effect of keeping the
ID used and when allocation rolls over to the beginning it keeps being
skipped.
The patch is loosely based on initial work by mjoras@.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
The current ifdefs are not sufficient to distinguish 32- and 64- bit
variants, which results e.g. in powerpc64 not using atomics.
While some 32-bit archs provide 64-bit atomics, there is no huge advantage
of using them on these platforms.
Reported by: many
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
The iflib subsystem implements netmap support in a driver-independent
way (sys/net/iflib.c). We can therefore remove the headers that
used to implement netmap support for all the drivers now supported
by iflib (em, igb, ixl, ixgbe, lem).
MFC after: 1 week
The sender has .not_terminated file. It gets disconnected. The last trail
file is then terminated without adding new data (this can happen for example
when auditd is being stopped on the sender). After reconnect the .not_terminated
was not renamed on the receiver as it should.
We were already handling similar situation where the sender crashed and the
.not_terminated trail file was renamed to .crash_recovery. Extend this case to
handle the situation above.
Re-apply r341665 with format strings fixed.
If we happen to taste a stale mirror component first, don't reject valid,
newer components that have differing metadata from the stale component
(during STARTING). Instead, update our view of the most recent metadata as
we taste components.
Like mediasize beforehand, remove some checks from g_mirror_check_metadata
which would evict valid components due to metadata that can change over a
mirror's lifetime. g_mirror_check_metadata is invoked long before we check
genid/syncid and decide which component(s) are newest and whether or not we
have quorum.
Before checking if we can enter RUNNING (i.e., we have quorum) after a NEW
component is added, first remove any known stale or inconsistent disks from
the mirrorset, rather than removing them *after* deciding we have quorum.
Check if we have quorum after removing these components.
Additionally, add a knob, kern.geom.mirror.launch_mirror_before_timeout, to
force gmirrors to wait out the full timeout (kern.geom.mirror.timeout)
before transitioning from STARTING to RUNNING. This is a kludge to help
ensure all eligible, boot-time available mirror components are tasted before
RUNNING a gmirror.
Add a basic test case for STARTING -> RUNNING startup behavior around stale
genids.
PR: 232671, 232835
Submitted by: Cindy Yang <cyang AT isilon.com> (previous version)
Reviewed by: markj (kernel portions)
Discussed with: asomers, Cindy Yang
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18062
r341392 changed common test cleanup routines in a way that allowed them to
be used by TAP tests as well as ATF tests. However, a late change made
during code review resulted in cleanup being broken for ATF tests, which
source geom_subr.sh separately during the body and cleanup phases of the
test. The result was that md(4) devices wouldn't get cleaned up.
MFC after: 2 weeks
X-MFC-With: 341392
