Commit Graph

48108 Commits

Author SHA1 Message Date
Sheldon Hearn 07593bef67 Remove the bogusly inserted ``cwd'' which isn't a builtin command
to sh, csh nor tcsh.

Fix the header line of the table to use cross-references and
emphasis.
2000-05-08 15:59:23 +00:00
Nick Hibma 600a4a54cc Use the new and shiny module versioning. This enables you to load the
ums driver (mouse) and get the usb driver at the same time.

This also shows that
	MODULE_VERSION(usb, 1);
	MODULE_DEPEND(usb, usb, 1, 1, 1);
in the same module in one source file works.
2000-05-08 15:10:05 +00:00
Yoshihiro Takahashi b95b56c7a0 Added PC-98 supports.
Obtained from:	FreeBSD(98) 4.0R-Rev01
2000-05-08 14:55:21 +00:00
Matt Jacob 2d41e34a07 Fix DELAY function to use the RPCC cycle counter register. 2000-05-07 22:44:27 +00:00
Mike Smith d50e5bd5cc For tape devices, 'r' means REWIND, not RAW. 2000-05-07 21:47:07 +00:00
Dag-Erling Smørgrav 068cd2851f While we're at it, add a length field too in case we want to fully implement
partial fetches later.
2000-05-07 20:52:40 +00:00
Dag-Erling Smørgrav 3d2a847151 Implement restart 2000-05-07 20:51:31 +00:00
Nick Hibma 3594c3a001 Forgot to mention: The previous patch undoes rev1.21 - rev1.22 change by
jlemon.
2000-05-07 20:48:16 +00:00
Nick Hibma c47eb96cb5 If PERIPH_1284 is not defined, don't even bother calling the BUS_*_INTR
functions.

If it is defined, check whether bus_alloc_resource has succeeded. If it
hasn't, it is in polled mode. Mike Nowlin reports that this change makes
the geek port (whatever _that_ is :-) work again on his machine.

Submitted by:	Mike Nowlin <mike@argos.org>
2000-05-07 20:46:49 +00:00
Nick Hibma 8feb725eb1 Add the fields needed to store the cookies. 2000-05-07 20:17:30 +00:00
Nick Hibma 659df154a5 Do the attach (and detach) properly. Store the cookies.
This is a first step to make usb unloadable.
2000-05-07 20:16:25 +00:00
Dag-Erling Smørgrav 807c941c90 Use sizeof more consistently. 2000-05-07 20:02:52 +00:00
Dag-Erling Smørgrav e6182307e8 Use sizeof more consistently.
Outline sanity checking of server port spec.
2000-05-07 20:01:55 +00:00
Dag-Erling Smørgrav 32425dafcd Implement restart.
Use sizeof more consistently.
Outline sanity checking of server port spec.
2000-05-07 20:00:12 +00:00
Dag-Erling Smørgrav 5ff28c822b Implement restart 2000-05-07 19:56:07 +00:00
Nick Hibma b4f9bcbc06 Add the Prolific PL2301 and PL2302 Link cables.
Submitted by:	Dirk van Gulik <dirkx@webweaving.org>
2000-05-07 19:49:48 +00:00
Dag-Erling Smørgrav fd75cc902e Add offset field to struct url 2000-05-07 19:46:33 +00:00
Nick Hibma 327ad7e530 We match on vendor/product so return the fact that udbp is vendor/product
specific.
2000-05-07 19:46:20 +00:00
Nick Hibma 2ed4a57a95 Regen. 2000-05-07 19:44:44 +00:00
Nick Hibma e48e9d2d2f Sync with NetBSD 2000-05-07 19:44:16 +00:00
Nick Hibma 9b43dd8df6 Remove debugging cruft. 2000-05-07 19:13:19 +00:00
Nick Hibma 5e163a2f39 Initialise the debug value. 2000-05-07 18:40:44 +00:00
Nick Hibma 1a5eec23dc Increase the debugging level on a printf. 2000-05-07 18:38:41 +00:00
Nick Hibma 6fb8656a29 Add a define for the Zip 250 2000-05-07 18:37:13 +00:00
Warner Losh c927ee19a4 Don't claim devices that we fail to probe for. Reverse the sense of a test
so that we return failure when we've failed and succeed when we succeed.
Otherwise, users always get a sn device :-(.

PR:		18431
Submitted by:	<sanpei@sanpei.org> MIHIRA Yoshiro-san
2000-05-07 18:20:40 +00:00
Nick Hibma 9a1c8571c7 *sigh* I must have been on something that night. Make xpt_periph an
extern with the original in cam_xpt.c instead of replicating
xpt_periph in all the sources using it (and hence not initialising it)
2000-05-07 18:04:50 +00:00
Matt Jacob 3920b84004 oops! final piece for Rawhides 2000-05-07 17:44:50 +00:00
Robert Watson f3706a0361 s/ffs_unmonut/ffs_unmount/ in a gratuitous ufs_extattr printf.
Reported by:	knu
2000-05-07 17:21:08 +00:00
Paul Saab 274254e1f1 Fix checksum calculations. This should fix the network problems
in current where all packets were returning with bad checksums.
(observed with netstat -s).

Reviewed by:	alfred
2000-05-07 16:41:15 +00:00
Duncan Barclay 88577b0806 Move _detach to be underneath _attach.
Move the code that checks the card into _probe and out of _attach and
shuffle a couple of things around in attach.

Set ifp in the variable block - catches unused variables.
2000-05-07 16:03:36 +00:00
Duncan Barclay b986ec50b9 Move variables to if_rayvar.h 2000-05-07 15:15:06 +00:00
Duncan Barclay 48913351d1 Split out structures to make it a bit easier to find my way around and
be more like sys/dev coding.
2000-05-07 15:12:18 +00:00
Duncan Barclay 9eb774e39c Sync with an early version of the -current code. Mainly a tidy up
of some function names, dropping the ISA bits that were never used and
removing __P

We've renamed the _pccard_ stuff as nothing else probes or attaches.

In the next commit we will move some routines around and split out some of the
structure definitions to another file.

I've dropped the SYSCTL as I never got it working. APM is gone too as it
is broken.

Note, that the attr_read/write will be in both this and NEWCARD/NEWBUS so
I've moved the prototypes to the right place.
Add a few casts.
2000-05-07 15:00:06 +00:00
Yoshihiro Takahashi 13f6a9caff Fixed bus_space_{read,write}_region_* functions.
Pointed out:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
2000-05-07 14:46:15 +00:00
Poul-Henning Kamp 831e32f863 Include a RFC 1533 "Maximum DHCP Message Size" option in our request.
ISC DHCP will limit the reply length to 64 bytes for bootp replies
unless we explicitly tell it we can do more.  We tell it that we can do
1200 bytes.
2000-05-07 14:29:19 +00:00
Nick Hibma d38aa24487 More static -> Static to keep OpenBSD happy. 2000-05-07 14:23:32 +00:00
Andrey A. Chernov 53ace76468 Remove stale file - moved to new location 2000-05-07 13:34:40 +00:00
Doug Rabson 80b173e496 Reserve 145 for DRI graphics system. 2000-05-07 13:31:41 +00:00
Brian Somers 17e57a5fe3 Correct a bad bug in m_prepend()
Submitted by: luoqi
2000-05-07 10:08:24 +00:00
Gerard Roudier 4fafb9d657 Work-around a couple of C1010 quirks:
- Reload SCNTL3 after selection from host   (C1010-33).
- Reload SCNTL4 prior to any DATA OUT phase (C1010-66).
- Use max SCSI offset 31 for ST but 62 for DT.
2000-05-07 09:54:33 +00:00
Kris Kennaway b7eea0fed1 Update device names. 2000-05-07 09:50:44 +00:00
Kris Kennaway 257875bed0 Update device name. 2000-05-07 09:27:53 +00:00
Kris Kennaway 080f16d410 Update device names 2000-05-07 09:26:49 +00:00
Kris Kennaway 4cc2c0e494 Oops, revert previous commit 2000-05-07 09:23:37 +00:00
Kris Kennaway 42bfb5ed40 Update device references. 2000-05-07 09:23:36 +00:00
Kris Kennaway 334f24bbab Update references to disk and tape devices. 2000-05-07 09:16:56 +00:00
Kris Kennaway 2ea2e54219 Update device names in examples. 2000-05-07 09:08:31 +00:00
Kris Kennaway 97ccc6c7ab Remove test for block device. 2000-05-07 08:56:21 +00:00
Kris Kennaway d3e8671e13 Zap reference to /dev/rvn* 2000-05-07 08:22:33 +00:00
Matt Jacob a9036c1818 Well, for now at least, we'll also have the 4100 also have a prom console. 2000-05-07 06:15:37 +00:00