address for the LCA PCI configuration register address.
FreeBSD/Alpha now boots on the NoName (aka AXPpci 33, Alpha PC), and probably
also on the Multia (mine hasn't arrived yet, so I can't tell for sure).
Submitted by: Doug Rabson <dfr@freebsd.org>
- Accept generic video mode names: 80x25, 80x30, etc. Specific video
mode names, VGA_80x25, VESA_132x25, are still accpeted too.
- Update the man page accordingly.
- Handle pixel (raster text) mode properly.
- Clear screen and paint border right.
- Paint text attribute (colors).
- Fix off-by-one errors.
- Add some sanity checks.
- Fix some function prototypes.
- Add some comment lines.
- Define generic text mode numbers so that the user can just give
"80x25", "80x60", "132x25"..., rather than "VGA_xxx", to `vidcontrol'
to change the current video mode. `vidoio.c' and `vesa.c' will map
these numbers to real video mode numbers appropriate and available
with the given video hardware. I believe this will be useful to make
syscons more portable across archtectures.
was constructed early enough, so perl was linking against the static lib.
This was breaking perl under ELF, as perl could not load shared objects
(in fact would dump core).
1) Part of the NOSHARED fix; I messed this up and managed to get
perl installed without being linked to the shared library libperl.so.
This broke Perl in ELF when linking in shared objects.
2) Start of a cleanup of the man3 page location. This will (eventually)
allow for a the ports to put their pages in the "normal" ${PREFIX}-
based location.
3) Nuke cruft.
which caused the reference count of a directory to get doubly
decremented.
PR: bin/8030
Reviewed by: nate
Submitted by: Don Lewis <Don.Lewis@tsc.tdk.com>
changes:
- Cleaned up register access macros so that they work like the XL
driver macros (you can switch from PIO to memory-mapped mode
using a single #define -- default is still memory mapped mode).
The old 'struct overlayed onto the memory mapped register space'
cruft has been removed.
- Improved multicast filter code. The ThunderLAN has four entry
perfect filter table in addition to the 64-bit hash table: we need
one of the perfect filter entries for the station address, but we
can use the other three for multicast filtering. We arrange to put
the first three multicast group addresses in the perfect filter
slots so that commonly joined groups like the all hosts group and
the all routers group can be filtered without using up bits in the
hash table.
Note: in FreeBSD 3.0, multicast groups are stored in a doubly
linked list, however new entries are added at the head of the list
(thereby pushing existing entries down towards the tail). We want
to update the filter starting from the oldest entry to the newest
since the all hosts group is always joined first. This means we
really want to start from the tail of the list, not the head, but
to find the tail we first have to traverse the list all the way to
the end and then add entries working backwards. This is a bit of a
kludge and could be inefficient if the list is long.
- Cleaned up autonegotiation code: tl_autoneg() wasn't always setting
modes correctly.
- Cleaned up ifmedia update and status routines as well.
- Added tl_hardreset() routine to initialize the internal PHY according
to the ThunderLAN manual.
- Did away with the kludge where PHYs were treated as separate logical
interfaces. This didn't really work, especially in the case of the
newer Olicom 2326 adapters which use a Micro Linear ML6692 PHY which
provides only 100Mbps support, relying on the internal PHY for 10Mbps
support (both PHYs share the RJ45 port, with the 6692 doing all the
autonegotiation work). This kludge resulted from my misunderstanding
of the operation of the Compaq Netelligent Dual Port card (the tlan
manual mentions multiple channels, but in a different context; this
got me a little confused). The driver has been reported to work
correctly with the dual port card.
- Added dio_getbit/dio_setbit/dio_read/dio_write functions which carefully
set the ThunderLAN's indirectly accessed internal registers. This makes
the EEPROM reading code more reliable.
Hopefully I won't have to touch this again before 3.0 goes out the door.
I plan to import the 2.2.x version sometime this week.
Approved-by: jkh
already allowed medium not present type errors (0x3a), but some Philips and
HP WORM drives return 0x04,0x00 when you issue a read capacity without
media in the drive.
enabling transfer negotiations, a BDR, or a bus reset to allow the controller
driver to negotiate without tagged messages getting in the way. Some
devices are confused by attempts to negotiate and tag at the same time.
Some controllers (e.g. BT MultiMaster with certain firmware revs) will
never negotiate if you don't give them an untagged "window" to perform
negotiation in.
Bump the maximum tag count to 255. The system reclaims unused tag space
as the tag count is dropped anyway, so we might as well try the max.
We should probably use a larger type than u_int8_t to hold our tag value
as SCSI over certain mediums allows for higher values.
Reviewed by: Kenneth Merry <ken@FreeBSD.org>
since ports are not supposed to be broken during the process of
conversion to ELF -- please proceed with caution.)
(2) Support for checking file size before fetching. The essential
parts are commented out for now, so I won't lose the submission
while we discuss how to do it.
Submitted by: se (mostly)
(3) Don't run "fetch" twice. It was due to the change in checksum
target chaining. It used to be fetch -> checksum -> extract,
after 1.285 it was fetch -> checksum and checksum was also
explicitly called from extract. Fix it by not calling fetch from
checksum when it's invoked by extract.
Noticed by: pre-fetch target of lesstif being run twice
(4) Don't try to remove non-existent distfiles and patchfiles in
distclean.
Submitted by: anto@netscape.net
PR: 7988
Western Digital Enterprise drives have sorry performance (1.5MB/sec versus
8MB/sec) when doing tagged queueing. Disable tagged queueing for them.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
Some Sony CDROM drives don't like it when we probe more than one LUN.
Verified by: Jean-Marc Zucconi <jmz@FreeBSD.ORG>
Some Sony CD-R's don't like multi-LUN probing either.
Submitted by: Parag Patel <parag@cgt.com>
an ``a'' command that has an escaped newline on the
last line of the last script that we're processing.
This fixes exmh2/scripts/build when /etc/malloc.conf -> AJ
the table boundary you get NULLs, and this was true for a.out, but some
ELF-related gremlin fills it with 0xff instead...
I suspect there are more problems of this type left in the tree. :-(
1) Inspired by JB's finding of a hardcoded /usr/bin/ranlib in the
config files, these have been properly cleaned up and have
been personalised for FreeBSD, not MarkM.
2) Inspired by Peter, copying of the lib/ext etc dirs has been
replaced by a link farm.
3) Common code has been moved to a higher-level Makefile.inc.
This has been tested with a make -j8.
Søren Schmidt
Bruce Evans
Jordan K. Hubbard
Gary Palmer
Luoqi Chen
Doug Rabson
Mike Smith
Andrzej Bialecki
David E. O'Brien
Kazutaka YOKOTA
Mark Murray
Nate Williams
Bill Paul
Kenneth D. Merry
Justin T. Gibbs
John Birrell
Satoshi Asami
Brian Somers
KATO Takenori
Masafumi Max NAKANE