Commit Graph

15327 Commits

Author SHA1 Message Date
Bruce Evans 4011dfccd2 Don't call disable_intr() when interrupts are already disabled, since
disable_intr() does non-recursive locking in the SMP case.  This should
fix cy-driver-related panics when SMP is configured.

Broken in:	rev.1.73 (3.1 and -current)
1999-05-28 13:23:21 +00:00
Roger Hardiman 1c2b593997 Add new Bt848/Bt878 driver options.
(Eventually I expect to move these into the man page)
1999-05-28 10:27:22 +00:00
Roger Hardiman 5cd2d29546 remote the bt848/bt878 comments
Suggested by: Bruce
1999-05-28 09:55:59 +00:00
Doug Rabson 0476a4d4ff Allow a sio port with its flags set to DEBUGGER+LLCONSOLE to be used for
gdb. This allows the sio probe for that port to be disabled which stops
it from confusing the debugger.
1999-05-28 09:37:11 +00:00
Doug Rabson bea6af4d31 * Change device_add_child_after() to device_add_child_ordered() which is
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
  probed before non-sensitive ones.
1999-05-28 09:25:16 +00:00
Brian Somers 8a768b4324 Always output a linefeed when we've decided whether to boot
or display a loader prompt; either we've said
"Booting [%s]..." or we've received a non-line-feed character
and need a '\n' anyway.
1999-05-28 08:01:52 +00:00
Alan Cox 72e51821d7 pmap_object_init_pt:
The size of vm_object::memq is vm_object::resident_page_count,
	not vm_object::size.
1999-05-28 05:38:56 +00:00
Alan Cox 9a2f6362a7 Avoid the creation of unnecessary shadow objects. 1999-05-28 03:39:44 +00:00
Andrew Gallatin f9476829d0 A forgotten bit of my ST6600 commit 1999-05-27 22:03:31 +00:00
Brian Somers 42c4682dd9 In tunclose():
Delete all routes if IFF_RUNNING is set, irrespective of IFF_UP
  Unset IFF_RUNNING.
1999-05-27 13:18:28 +00:00
Kazutaka YOKOTA 8bae108840 Print some diagnostic messages for the PCI-ISA bridge,
if bootverbose > 0.

Reviewed by: dfr
1999-05-27 12:26:50 +00:00
David Greenman 9a039a5fec Added net.inet.tcp.path_mtu_discovery variable which when set to 0
(default 1) disables PMTUD globally. Although PMTUD can be disabled in
the standard case by locking the MTU on a static route (including the
default route), this method doesn't work in the face of dynamic routing
protocols like gated.
1999-05-27 12:24:21 +00:00
David Greenman afed137543 Made net.inet.ip.intr_queue_maxlen writeable. 1999-05-27 12:20:33 +00:00
Roger Hardiman 468bc8361c Move BX PCI-PCI (AGP) bridge from chip_match to pcib_match
so it is reported correctly in dmesg.

Add 440 LX and 440 BX to the descriptions as these are the names
in common usage
1999-05-27 10:59:40 +00:00
Doug Rabson 8be70a6eac Fix an embarrasing typo in device_add_child_after(). I can't understand
how this hasn't caused problems before.

Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1999-05-27 07:18:41 +00:00
Roger Hardiman 229cf3c335 Add support for ASound Gold card using the ALS120
chipset (a vibra 16x clone)
Identified automatically by its PnP ID

Approved by: Luigi
1999-05-27 06:12:40 +00:00
Andrew Gallatin 7ae6cdbca2 Add support for the DEC_ST6600 family of alphas. This includes the
Compaq XP1000, AlphaServer DS20, AlphaServer DS10, and DP264

This has been tested *only* on XP1000's.  I'll be interested to hear from
owners of other types of DEC_ST6600 alphas.

I'd like to thank Don Rice of Compaq for providing the documentation required
to support this platform on FreeBSD.  I'd also like to thank Doug Rabson for newbus,
and for helping me get a multiple hoses working with newbus.

Reviewed by:	Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:22:14 +00:00
Andrew Gallatin 348ae53ad0 Remove redundant redefinition of vtophys(). This is already in if_pnreg.h 1999-05-26 23:08:04 +00:00
Andrew Gallatin 0f884d6cef Forgotten in previous commit:
Allow chipset drivers to specify the direct-mapped DMA window's mask in
preparation for tsunami support.  Previous chipsets' direct-mapped DMA
mask was always 1024*1024*1024.  The Tsunami chipset needs it to be
2*1024*1024*1024

Reviewed by:	Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:05:23 +00:00
Andrew Gallatin 50b8d1cce4 Allow chipset drivers to specify the direct-mapped DMA window's mask in
preparation for tsunami support.  Previous chipsets' direct-mapped DMA
mask was always 1024*1024*1024.  The Tsunami chipset needs it to be
2*1024*1024*1024

These changes should not affect the i386 port

Reviewed by:	Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:01:57 +00:00
Bill Paul 430f792e8c Two small tweaks:
- Clear the IFF_OACTIVE flag when al_txeof() runs down the last TX mbuf chain.
- Mark the workaround for the transmitter stalling bug with
  #ifdef AL_TX_STALL_WAR/#endif.
1999-05-26 22:56:22 +00:00
Justin T. Gibbs 51064aaaf8 Ignore subvendor and subdevice ids for all ai7880 parts. These chips
only support 'mirroring' the vendor and device ids, so we don't
lose any information.  Certain revisions of the aic7880 will not
perform the mirroring so to match all possiblities would double
the number of table entries.  This change also allows us to match
things like the 2944B which I missed in the original table.
1999-05-26 16:59:17 +00:00
Roger Hardiman 24e89aa850 Updated options for the Bt848/Bt878 driver
This includes the BKTR_430_FX_MODE and BKTR_SIS_VIA_MODE options which make
Bt878/879 cards work better on 430FX and old SiS/VIA/OPTi boards
1999-05-26 13:24:35 +00:00
Roger Hardiman e503a07843 Identify Intel 440 LX chipset motherboards 1999-05-26 13:14:24 +00:00
Matt Jacob b9c8458b9d Add TDC 3800 to quirk list for fixed mode device.
PR:11866
Submitted by:	Helge Oldach hmo@sep.hamburg.com
1999-05-25 23:10:54 +00:00
Justin T. Gibbs 9911ecf957 Run xpt_action at splsoftcam() so that it cannot be re-entered by our SWI.
The XPT doesn't have a problem with this itself, but some controllers
drivers may have been caught off guard by the old behavior.

XPT_CONT_TARGET_IO is also a valid ccb type for cam_periph_unmapmem.
1999-05-25 20:17:29 +00:00
Justin T. Gibbs 26b4048320 Turn the 'ahc dump eeprom' flag into a real option. 1999-05-25 20:15:54 +00:00
Justin T. Gibbs b53bae294f Turn the 'dump eeprom' flag into a real option. 1999-05-25 20:15:41 +00:00
Justin T. Gibbs 378d6d7395 The 1542 cards do not allow adapter commands to be queued while mailbox
commands are outstanding.  You'd think they'd just clear the IDLE bit,
but alas, no.  Delay until all pending mailbox commands have completed
in aha_cmd to work around this.

Report sync rates correctly on Fast Adaptec cards.  Clones may still be
reported incorrectly since there is no documenation on how they report
extended sync values.

Clean up some unused fields in the aha softc.
1999-05-25 20:15:20 +00:00
Justin T. Gibbs f40c8d7155 All cards using aic789X chips use the new eeprom format.
Corrects bogus negotiation values on aic7890 based controllers.

PR: 11872
1999-05-25 20:12:32 +00:00
Julian Elischer f7831602d5 Compaq "Intelligent Disk Array" driver.
Mark Dawson holds teh copyright on this and has releases from
Compaq to allow him to do so..

Not functional in 4.0 yet but being checked in to allow the functional
3.x version to be branched at this point.
1999-05-25 19:45:17 +00:00
Dmitrij Tejblum eee8a8e4e0 From our i386 counterpart:
|revision 1.13
|date: 1995/09/15 23:49:23;  author: davidg;  state: Exp;  lines: +15 -2
|Check for page being resident when doing I/O with /dev/kmem and return
|EFAULT if it is not resident. This prevents the system from manufacturing
|a zero-fill page for unused but allocated areas of the kernel's VM.
1999-05-25 19:32:53 +00:00
Kenneth D. Merry edd24ab742 Fix the read/write permission checks in cam_periph_mapmem(). If we're
writing, we want to be able to read the buffer.  If we're reading, we want
to be able to write to the buffer.

PR:		kern/11870
Submitted by:	Andrew Mobbs <amobbs@allstor-sw.co.uk>
1999-05-25 17:10:04 +00:00
Roger Hardiman ceed656248 Add OPTi 82c822 host to PCI bridge
This is an old OPTi chipset.
If you use a Bt878 card with this chipset, be sure to enable
the SIS/VIA chipset compatiblity mode workaround.

Tested By: Ben Laurie <ben@algroup.co.uk>
1999-05-25 15:56:10 +00:00
Roger Hardiman 8fa3a2e7ed Rename 849 to 849A (the correct name for the IC) 1999-05-25 12:44:40 +00:00
Roger Hardiman ec3a598be7 Add support for the Bt878/Bt879's Intel 430 FX and
SIS/VIA/ OPTi chipset PCI bus workarounds.

These make the Bt878/879 chips stabler on certain
older and non-intel motherboards.

Use options BKTR_430_FX_MODE
or  options BKTR_SIS_VIA_MODE
to enable these modes.

Also rename 849 to 849A
1999-05-25 12:43:40 +00:00
KATO Takenori 128cd97530 Merge with sys/i386/isa/wd.c revision 1.192 and 1.193.
Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1999-05-25 10:41:14 +00:00
KATO Takenori fb84c9994c Sync with sys/i386/i386/userconfig.c revision 1.145. 1999-05-25 10:32:10 +00:00
KATO Takenori 607f92b4bd Sync with sys/i386/conf/options.i386 revision 1.114. 1999-05-25 10:30:58 +00:00
Brian Somers 63e13c80ea Back the last change out.
It upsets the calculations in sys.c (switch(maj)).
1999-05-25 10:30:52 +00:00
Brian Somers cd956c3bc1 Allow booting from "ad"
Reviewed by: Søren
1999-05-25 09:32:00 +00:00
Robert Nordier c9091105f3 Activate mbr. 1999-05-24 22:44:32 +00:00
Robert Nordier 9292eec80d Add mbr: a standard master boot record intended to replace a couple
that are presently embedded in the fdisk and sysinstall code.
1999-05-24 22:36:24 +00:00
Doug Rabson 1522abdd5e Don't try to allocate memory resource unless address is non-zero. 1999-05-24 18:50:41 +00:00
Bill Paul 497760a16a Fix bug that can cause transmit corruption. There are actually two 'rings'
in the transmit code: the TX descriptor ring, and a 'shadow' ring of mbuf
pointers, one for each TX descriptor. When transmitting a packet that
consists of several fragments in an mbuf chain, we link each fragment
to a descriptor in the TX ring, but we only save a pointer to the mbuf
chain. This pointer is saved in the shadow ring entry which corresponds
to the first fragment in the packet. Later, ti_txeof() can release the
whole chain with a single m_freem() call. (We need the second ring to
keep track of the virtual addresses of the mbuf chains.)

The problem with this is that the Tigon isn't actually through with the
mbuf chain until it reaches the last fragment (which has the TI_BDFLAG_END
bit set), however the current scheme releases the mbuf chain as soon as
the first fragment is consumed. This is wrong, since the mbufs can then
be yanked out from under the Tigon and modified before the other fragments
can be transmitted.

The fix is to make a one line change to ti_encap() so that it saves the
mbuf chain pointer in the shadow ring entry that corresponds to the last
fragment in TX ring instead of the first. This prevents the mbufs from
being released until the last fragment is transmitted.

Painstakingly diagnosed and fixed by: Robert Picco <picco@mail.wevinc.com>
Brought to my attention by: dg
1999-05-24 14:56:55 +00:00
Luigi Rizzo e142fadecb close pr 10889:
+ add a missing call to dn_rule_delete() when flushing firewall
  rules, thus preventing possible panics due to dangling pointers
  (this was already done for single rule deletes).
+ improve "usage" output in ipfw(8)
+ add a few checks to ipfw pipe parameters and make it a bit more
  tolerant of common mistakes (such as specifying kbit instead of Kbit)

PR: kern/10889
Submitted by: Ruslan Ermilov
1999-05-24 10:01:22 +00:00
Peter Wemm 578de0426e Fix a [start,end] vs [start,count] botch that corrupted the resource
manager and prevented IOPort allocation beyond the first EISA slot from
working.  subr_rman.c should have trapped this on the way into the system
rather than tripping over the wreckage.

Head banged into wall repeatedly by:  "Matthew N. Dodd" <winter@jurai.net>
1999-05-24 03:08:46 +00:00
John Birrell 8fb7da0099 Remove the mfs stuff now that mfs_init() does the MFS_ROOT initialisation. 1999-05-24 00:54:17 +00:00
John Birrell 350185153d Back out my previous change (phk didn't like it) in favour of setting
rootdev in the mfs initialisation code iff MFS_ROOT (which Bruce doesn't
like). Damned if I do - damned if I don't.
1999-05-24 00:37:26 +00:00
John Birrell 02013ff886 Remove the test for bdevsw(dev) == NULL from bdevvp() because it fails
if there is no character device associated with the block device. In this
case that doesn't matter because bdevvp() doesn't use the character
device structure.

I can use the pointy bit of the axe too.
1999-05-24 00:34:10 +00:00