cc33ccc9bc
Add new IS_INTERACTIVE flag. This lets you specify that the port
...
is an interactive port, and requires user input somewhere along
the way (either fetching, configuring, building or installing).
If the user then sets BATCH in their environment, this port will be
skipped. If the user sets INTERACTIVE, then ONLY those ports marked
interactive are run (allowing one to do all ports in two passes).
If the user sets both BATCH and INTERACTIVE, then a metal claw extends
from the CRT and brutally yanks their nose off.
1994-10-14 07:56:46 +00:00
288b78cdc3
Add ft.
...
Submitted by: babb
1994-10-14 06:14:58 +00:00
cfa2a10c70
Sigh. NOW it's ok! :-)
1994-10-14 05:57:49 +00:00
1593f21e50
Print a better verbose message when creating packages.
1994-10-14 05:56:15 +00:00
69bb95d933
This should do it - I forgot about pkg_info.
1994-10-14 05:55:57 +00:00
9b98d77e09
Whoops - variable was in wrong scope. Correct.
1994-10-14 05:43:41 +00:00
ae38c11f2d
Fix bug in home directory calculation that I introduced with the free space
...
checking code. Fix the free space checking code, while I'm at it! ;)
Thanks to Garrett for spotting the home dir problem.
1994-10-14 05:42:24 +00:00
5da4a65126
Fix bug in home directory calculation that I introduced with the free space
...
checking code. Fix the free space checking code, while I'm at it! ;)
Thanks to Garrett for spotting the home dir problem.
1994-10-14 05:34:04 +00:00
2e1e24dd28
Fixed bug where page modifications would be lost when swap space was
...
almost depleted.
Reviewed by: John Dyson
1994-10-14 01:58:52 +00:00
defb6744ba
Changed I/O error messages to be somewhat less cryptic. Removed a piece
...
of unused code.
1994-10-14 00:57:19 +00:00
e2637b6b1c
Fix some endianness and packet header bugs found in BSDi's port of this code.
...
(From mbone mailing-list.)
1994-10-13 22:12:42 +00:00
2b101991d4
Damn, check in the wrong version, fixed.
...
Reviewed by:
Submitted by:
Obtained from:
1994-10-13 21:41:36 +00:00
6e542db138
Main iBCS2 include file. First part of iBCS2 emulator.
1994-10-13 21:08:11 +00:00
8117efaa95
Made it possible for ioctl to return a value.
...
Ifdef by COMPAT_IBCS2 (used by the socksys system).
Submitted by: Mostyn Lewis (mostyn@mrl.com )
1994-10-13 21:01:47 +00:00
28e12d63f3
Fixed an object reference count problem that was caused by a call to
...
vm_object_lookup() being outside of some parens. The bug was introduced
via some recently added code.
Reviewed by: John Dyson
1994-10-13 21:01:39 +00:00
6fc4a1ae38
Added ifdef COMPAT_IBCS2 around setre[ug]id.
1994-10-13 20:59:49 +00:00
b938dc2407
sysctl(3) can return an error (setting errno to ENOMEM) when the
...
fields in the utsname structure are too small to hold their
corresponding MIB variables. Don't return an error in this case.
1994-10-13 20:31:19 +00:00
5411ea9d8c
Added ibcs2_socksys file.
1994-10-13 20:19:11 +00:00
539168b09f
Added socksys device (for iBCS2 emulation)
...
Reviewed by:
Submitted by:
Obtained from:
1994-10-13 20:17:06 +00:00
a163498e32
Added socksys device (for iBCS2 emulation)
1994-10-13 20:10:14 +00:00
10be56487a
As suggested by Sally Floyd, don't add the ``small fraction of the window
...
size'' when doing congestion avoidance.
Submitted by: Mark Andrews
1994-10-13 18:36:32 +00:00
1dc73d350b
Added ncrcontrol (display and configure NCR 53c810 SCSI parameters).
1994-10-13 18:10:40 +00:00
176416ca2e
Added call to getbootfile() and removed reference to ncr.imask.
1994-10-13 18:01:32 +00:00
7d44d0e3cf
ncrcontrol will be installed SETGID kmem in /usr/sbin.
1994-10-13 17:45:40 +00:00
35321ba474
Moved into correct MAN section ...
1994-10-13 17:43:51 +00:00
c41b51643d
Silence the sub-makes.
1994-10-13 10:33:35 +00:00
3270fb5ece
Put back the `:' in the trinary ?: so this can actually compile again! :)
1994-10-13 08:46:44 +00:00
64324dc610
Change the way pre-install was done after a suggestion from Andrew.
...
Now both pre-install and install inherit the INSTALL_COOKIE.
1994-10-13 08:08:56 +00:00
55f018a694
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
removed PCI mapping call from vga_attach() in pcisupport.c.
1994-10-13 01:12:31 +00:00
152f2ff316
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Debugging option changed, getirr() removed.
1994-10-13 01:11:13 +00:00
baaac71882
Re-work the way pre-install was being depended. I couldn't make the
...
install cookie work any other way (perhaps I'm just being stupid).
In any case, INSTALL_COOKIE now works as advertised, and prevents duplicate
installations. pre-install users will have to keep their own cookies if
they wish to avoid duplicate installations, or tell me how to make the
rules run properly.
1994-10-12 23:32:32 +00:00
72ab19aeb7
Added '-F file' option of mount_mfs. This allows me to make floppy images
...
without waiting for my floppy-drive all the time :-) Might have other
interesting uses too.
1994-10-12 22:04:36 +00:00
2a460312c8
Don't allow the same MISC module loading more than once..
1994-10-12 20:28:32 +00:00
b2f6e97280
Work around FIFO bug in SMC UARTS.
...
Fix endless loop in siopoll() for an event on a tty with no tty struct.
Don't generate unwanted interrupts in the serial console driver. These
bugs probably don't matter unless the tty struct is dynamically allocated.
Support polled mode. To use it, leave out the irq and the vector in
the config file. It only causes extra overhead for open polled ports.
The maximum usable speed is approximately 1000 bps for a 16450 and
15000 bps for a 16550.
Other cosmetic changes.
1994-10-12 19:49:11 +00:00
a9db861824
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Config and statuts display utility for the NCR PCI SCSI driver.
1994-10-12 12:02:52 +00:00
fb912bf5b8
Submitted by: Matt Thomas <thomas@lkg.dec.com>
...
#ifdef MULTICAST removed.
1994-10-12 11:39:37 +00:00
140e168d9b
Submitted by: Matt Thomas <thomas@lkg.dec.com>
...
Preliminary FAST Ethernet support added (DEC21140).
1994-10-12 11:19:36 +00:00
157823e855
Temporary disable scanning for VGA cards, was causing problems.
1994-10-12 11:06:49 +00:00
5044407419
Submitted by: Bruce Evans <bde@zeta.org.au>
...
Function getirr() could clobber interrupt controller state.
1994-10-12 04:17:24 +00:00
1915df31ae
Added a 10ms delay after the HW-reset in bt_init(). This makes some funky
...
old boards more happy.
Reviewed by: Julian
Submitted by: Julian
1994-10-12 04:15:30 +00:00
8f7b2bb2fb
Name change: pci_intel.c -> pcisupport.c
1994-10-12 03:56:49 +00:00
3d1e296ec5
Oops, change ${MAKE_FLAGS} to ${MAKEFLAGS} in pre-configure line
1994-10-12 03:25:59 +00:00
ec55794466
Move 'make pre-configure' inside .configure.done: target, or
...
it issued again and again instead.
1994-10-12 03:12:19 +00:00
b82fc8c612
configure: pre-configure extract ... must be
...
configure: extract pre-configure ...
1994-10-12 02:58:38 +00:00
468010e809
Small corrections:
...
pci config line now without irq
boot message changed
1994-10-12 02:41:21 +00:00
e1e293a5dc
Added '-b' option to display the number of in and out bytes on a given
...
interface (used with -i and -I flag).
1994-10-12 02:37:35 +00:00
65772aee92
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Bug fixed, that caused system hang on first interrupt on some motherboards.
New version of PCI bus configuration code, now supports dynamic interrupt
configuration (using BIOS supplied values).
NCR SCSI and DEC Ethernet driver patched to use this feature.
*** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
86e0c19b6c
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: pci_intel.c -> pcisupport.c
1994-10-12 02:27:08 +00:00
8870af7f56
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Files merged and name change: pci_device.h + pcibios.h -> pcireg.h
1994-10-12 02:25:03 +00:00
22d3e9a6d7
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: ncrstat -> ncrcontrol
1994-10-12 02:23:14 +00:00
Jordan K. Hubbard
David Greenman
Garrett Wollman
Søren Schmidt
Stefan Eßer
Poul-Henning Kamp
Bruce Evans
Andrey A. Chernov