Commit Graph

31153 Commits

Author SHA1 Message Date
Jordan K. Hubbard ef949dd17d Add entries for xl0, tlc0 and adv0. Some of these aren't even
in LINT!
1998-09-07 13:00:58 +00:00
Bruce Evans ff261f16f6 Put the zombie ffs sysctl node in "notyet" state together with its few
remaining children.  Prepare it for MOUNT_UFS going away.
1998-09-07 11:50:19 +00:00
Doug Rabson 1fdfa7ab3c Update alpha configuration files and remove i386 target from
libbinutils/config.h - it is declared in the arch Makefile.
1998-09-07 08:18:34 +00:00
Doug Rabson dfa8100aec Use Elf_Addr to store addresses instead of Elf_Word. 1998-09-07 07:30:44 +00:00
Doug Rabson feb6634586 Device framework code now declared in MI code. 1998-09-07 07:29:30 +00:00
Guido van Rooij a031dfd5e2 Fix problem reported on bugtraq: check permission of device mounted
for non-root users. Fortunately, the default for vfs.usermount is 0.
Tested by:	"Jan B. Koum " <jkb@best.com
1998-09-07 07:20:30 +00:00
Poul-Henning Kamp 21aa768ea1 Make MFS do the default on VOP_FREEBLKS().
XXX: we could deallocate the storage, but somebody else will
have to pick up that task.
1998-09-07 06:52:01 +00:00
Andrzej Bialecki 771383c4b3 Set the ${suffix} only once... 1998-09-07 06:46:25 +00:00
Andrzej Bialecki 1bd2addb75 * Add code to display statistics continuously, every some seconds.
* Fix a number of mem leaks.
* Update README.

Submitted by:	Luigi Rizzo <luigi@iet.unipi.it>
1998-09-07 06:41:14 +00:00
John Birrell a8228cf988 Install the legacy man file in section 1aout. 1998-09-07 06:01:37 +00:00
John Birrell c908270ee3 Add a man section 1aout for the legacy man files to avoid them being
installed over the ones from binutils.
1998-09-07 05:55:02 +00:00
Sean Eric Fagan 3625b5147c Use a default execution type if none of the listed ones match. This
uses the first type listed in the array as the default type.  This isn't
perfect, but I thought it would be better than nothing.
1998-09-07 05:49:43 +00:00
John Birrell b43abe2d55 Install the legacy man file in section 1aout. 1998-09-07 05:46:09 +00:00
John Birrell 05dcabb215 Add directories for the legacy tool man files to stop them over-writing
the ones from binutils.
1998-09-07 05:43:41 +00:00
Bruce Evans cae300be0f Made unloading of the nfs LKM sort of work. This is mainly to test
detachment of vfs sysctls.  Unloading of vfs LKMs doesn't actually
work for any vfs, since it leaves garbage pointers to memory
allocation control structures.
1998-09-07 05:42:15 +00:00
Tor Egge 3bfe64f96a Don't go below the low water mark of free pages due to optional prefaulting
of pages.
PR:		2431
1998-09-06 23:04:20 +00:00
John Polstra 34d2198035 Update for import of binutils-2.9.1.
Submitted by:	Doug Rabson <dfr>
1998-09-06 23:01:53 +00:00
John Polstra 0a225ac59d Resolve conflicts from import of binutils-2.9.1.
Submitted by:	Doug Rabson <dfr>
1998-09-06 23:00:35 +00:00
John Polstra 914f9af1ba This commit was generated by cvs2svn to compensate for changes in r38889,
which included commits to RCS files with non-trunk default branches.
1998-09-06 22:57:45 +00:00
John Polstra f3c0afbfb0 Import GNU binutils-2.9.1. This will break things for a few minutes
until I've made the commits to resolve the conflicts.

Submitted by:	Doug Rabson <dfr>
1998-09-06 22:57:45 +00:00
Tor Egge 572d053e17 Maintain a mapping from irq number to (ioapic number, int pin) tuple,
and use this when masking/unmasking interrupts.

Maintain a mapping from (iopaic number, int pin) tuple to irq number,
and use this when configuring devices and programming the ioapics.

Previous code assumed that irq number was equal to int pin number, and
that the ioapic number was 0.

Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
Tor Egge 6f47734fd7 Better handling of word splitting. Don't record the same region
multiple times when performing nested variable expansion, and
preserve some quoting information in order to avoid removing
apparently empty expansion result.
1998-09-06 21:13:09 +00:00
Tor Egge 37f0a6708e Don't blindly eliminate `..' and the previous pathname component.
PR:		2541
Obtained from:	NetBSD
1998-09-06 21:01:57 +00:00
John Polstra 614d19ca10 Fix calls to mmap. It returns void *, and on failure it returns
MAP_FAILED.

Don't try to extend the mapping in place if it is too short.
There's no guarantee it will be possible.  Remap the file instead.

Put in a few style fixes.

Submitted by:	Bruce Evans <bde>
1998-09-06 20:43:25 +00:00
Robert V. Baron 03507b2123 Clean LINT 1998-09-06 20:01:34 +00:00
Bill Paul 7c76d5ca4e Patch the transmit error handler to avoid following NULL pointers and
generating a trap 12 panic. The code blindly assumed that in the event
of a transmit error, the packet that caused the error would still be
at the head of the driver's transmit queue (sc->xl_cdata.xl_tx_head).
However in the case of error 82 (which indicates that a transmit error
occurred after part of the transmit FIFO memory has been reclaimed)
this is not true: the TX queue has already been flushed, and the
pointer to the head of the queue is NULL, so trying to dereference
the pointer to find the transmit descriptor address causes a crash.

The code now checks for a NULL pointer before trying to reload the
chip's download pointer register. There may still be error messages
printed warning of the transmit error, but no panic should occur.

Note that this eror code is only generated with "cyclone" chipsets
(3c900B, 3c905B, and presumeably the 3c980 server adapter). It should
only appear during periods of heavy traffic, probably only on
non-switched networks.

Problem reported by: Darcy Buskermolen <darcy@ok-connect.com>
1998-09-06 14:58:46 +00:00
Brian Somers e318783765 Add a compuserve example.
Detailed by: Masahiro Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>
1998-09-06 13:55:51 +00:00
David E. O'Brien 8a2d7d2231 Fix tons of cut-n-paste errors in the WANT_NFS3 code. 1998-09-06 09:21:35 +00:00
Matthew Dillon 49d6409ac7 Reviewed by: Andrey A. Chernov <ache@nagual.pp.ru>, Doug Rabson <dfr@nlsystems.com>
Rewrote sleep() to remove int/long typing assumptions between the argument
    to the function and the timespec structure.
1998-09-06 09:11:06 +00:00
Joseph Koshy fe6894b6dc Use a varargs style prototype in the manual page, with accompanying
explanation in the text.
1998-09-06 08:50:49 +00:00
Poul-Henning Kamp e5d237d4b9 tcp_extensions now only applies to RFC1323 1998-09-06 08:20:11 +00:00
Poul-Henning Kamp 19ddafa3b3 RFC 1644 has the status "Experimental Protocol", which means:
4.1.4.  Experimental Protocol

      A system should not implement an experimental protocol unless it
      is participating in the experiment and has coordinated its use of
      the protocol with the developer of the protocol.

Pointed out by:	Steinar Haug <sthaug@nethelp.no>
1998-09-06 08:17:35 +00:00
Andrey A. Chernov 99237364cc Store formatted panic string in static buffer to make it available later
for savecore.
Previous code give only panic format to savecore
1998-09-06 06:25:18 +00:00
John Birrell 85a5d7a93d Change the ELF64_R_SYM() to shift 32 bits instead of 8 bits to match
binutils.

Ensure that three of the structures are the size that binutils writes
them. I just love code that doesn't share header files to avoid
problems like these.

With this change rtld-elf works on alpha.
1998-09-05 23:07:59 +00:00
David E. O'Brien 3c08780bdb NFS can use TCP now days 1998-09-05 20:42:47 +00:00
John Polstra a3bd401942 Don't recognize a file as an a.out shared library unless it has at
least 2 version numbers.  This fixes the bug where the dynamic
linker would try to load an ELF shared library if it found one.

Note, this change also fixes the same thing in "ld", because the
code is shared.

For "ld" there is still a problem with ".a" libraries, which cannot
be distinguished by name.  I haven't decided what, if anything, to
do about that.
1998-09-05 20:28:48 +00:00
Bruce Evans e99ea9ec2b Ignore the statically configured vfs type numbers and assign vfs
type numbers in vfs attach order (modulo incomplete reuse of old
numbers after vfs LKMs are unloaded).  This requires reinitializing
the sysctl tree (or at least the vfs subtree) for vfs's that support
sysctls (currently only nfs).  sysctl_order() already handled
reinitialization reasonably except it checked for annulled self
references in the wrong place.

Fixed sysctls for vfs LKMs.
1998-09-05 17:13:28 +00:00
John Polstra 5f8d88ddd6 For a.out mode, ignore shared libraries that don't have at least 2
version numbers.
1998-09-05 16:20:15 +00:00
Bruce Evans 513336871a Don't do anything special to prevent access to created files - honour
the default umask.  World unreadable files broke installing over nfs.
1998-09-05 15:56:10 +00:00
Bruce Evans 500b04a257 Instantiate `nfs_mount_type' in a standard file so that it is present
when nfs is an LKM.  Declare it in a header file.  Don't forget to use
it in non-Lite2 code.  Initialize it to -1 instead of to 0, since 0
will soon be the mount type number for the first vfs loaded.

NetBSD uses strcmp() to avoid this ugly global.
1998-09-05 15:17:34 +00:00
Doug Rabson 69beb1913e Disable gcc's builtin memcpy for alpha since it doesn't cope with unaligned
regions properly and this triggers an unaligned access trap.
1998-09-05 15:11:47 +00:00
Bruce Evans 134e06fe71 Fixed bogotification of pseudocode for syscall args by rev.1.53 of
syscalls.master.
1998-09-05 14:30:11 +00:00
Bruce Evans 266ead86bc Sysctl nodes are written to, so don't put them in the text section.
Our write protection of the kernel text on i386's doesn't actually
work in many cases:
- use of the 4MB page completely breaks it.
- CR0_WP isn't set until just before init is started, so the kernel
  text is not write protected during kernel initialization.
1998-09-05 14:13:35 +00:00
Poul-Henning Kamp 0375c9f2b8 Add a new vnode op, VOP_FREEBLKS(), which filesystems can use to inform
device drivers about sectors no longer in use.

Device-drivers receive the call through d_strategy, if they have
D_CANFREE in d_flags.

This allows flash based devices to erase the sectors and avoid
pointlessly carrying them around in compactions.

Reviewed by:	Kirk Mckusick, bde
Sponsored by:	M-Systems (www.m-sys.com)
1998-09-05 14:13:12 +00:00
Bruce Evans a8b8bc0730 Fixed recently perpetrated printf format errors. 1998-09-05 13:24:39 +00:00
Bruce Evans 6ade4cf7a4 Don't comment out dead code. Remove it.
Fixed disgustingly long lines.

Improved English in some comments.
1998-09-05 12:42:56 +00:00
Satoshi Asami 140a040ae3 Remove tcl from src/contrib. 1998-09-05 12:33:01 +00:00
Satoshi Asami ff5fcc93d4 Remove tcl from /usr/src, according to prior agreement. BTW, tcl-8.0 *is*
a port so there is nothing to be done on that side now.

Approved by:	jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700

>decision is, I'll respect it.

   Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
   Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
   As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
   Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.

-DG

David Greenman
Core-team/Principal Architect, The FreeBSD Project
1998-09-05 12:25:55 +00:00
John Birrell d64c14ce31 Change i386 in a few paths to ${MACHINE} to support MACHINE=pc98. 1998-09-05 11:37:14 +00:00
John Birrell fed060ba0a Change MACHINE to MACHINE_ARCH when testing for i386 to support
MACHINE=pc98.

There are a lot unsupported machines here.
1998-09-05 08:35:53 +00:00