Add mediamtx vm.

ansible/roles/media/files/cast_file_vaapi

@@ -1,11 +1,179 @@
 #!/usr/bin/env bash
 #
+set -euo pipefail
+IFS=$'\n\t'
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
-ffmpeg -re -vaapi_device /dev/dri/renderD128 -i "$1" -vf 'format=nv12,hwupload' -c:v h264_vaapi -r 30 -g 30 -loop -1 -c:a aac -b:a 160k -ar 44100 -strict -2 -f flv rtmp:172.16.16.44/live/test &
-ffmpegpid=$!
 
-sleep 1
-castnow --exit 'https://broadcast.fizz.buzz/hls/hls/test.m3u8'
-wait "$ffmpegpid"
 
-sleep 10
+function main {
+    local cmd
+    cmd=$1
+    shift
+    if [ "$cmd" = "copy" ]; then
+        copy "${@}"
+    elif [ "$cmd" = "h264" ]; then
+        h264 "${@}"
+    elif [ "$cmd" = "software_h264" ]; then
+        software_h264 "${@}"
+    elif [ "$cmd" = "preprocess_h264" ]; then
+        preprocess_h264 "${@}"
+    elif [ "$cmd" = "preprocess_vp8" ]; then
+        preprocess_vp8 "${@}"
+    elif [ "$cmd" = "webcam" ]; then
+        webcam "${@}"
+    elif [ "$cmd" = "encode_webcam" ]; then
+        encode_webcam "${@}"
+    else
+        (>&2 echo "Unknown command: $cmd")
+        exit 1
+    fi
+}
+
+function copy {
+    local file_to_cast
+    file_to_cast="$3"
+
+    local USERNAME PASSWORD
+    USERNAME="$1"
+    PASSWORD="$2"
+
+    exec ffmpeg \
+        -re \
+        -stream_loop -1 \
+        -i "$file_to_cast" \
+        -c copy \
+        -f rtsp \
+        -rtsp_transport udp \
+        "rtsp://$USERNAME:$PASSWORD@172.16.16.251:8554/fetch"
+}
+
+function h264 {
+    local file_to_cast
+    file_to_cast="$3"
+
+    local USERNAME PASSWORD
+    USERNAME="$1"
+    PASSWORD="$2"
+
+    # -bf 0 :: Disable b-frames because webrtc doesn't support h264 streams with b-frames.
+    exec ffmpeg \
+        -re \
+        -stream_loop -1 \
+        -init_hw_device vaapi=foo:/dev/dri/renderD128 \
+        -hwaccel vaapi \
+        -hwaccel_output_format vaapi \
+        -hwaccel_device foo \
+        -i "$file_to_cast" \
+        -filter_hw_device foo \
+        -vf 'format=nv12|vaapi,hwupload' \
+        -c:v h264_vaapi \
+        -bf 0 \
+        -c:a aac \
+        -b:a 160k \
+        -ar 44100 \
+        -f rtsp \
+        -rtsp_transport udp \
+        "rtsp://$USERNAME:$PASSWORD@172.16.16.251:8554/fetch"
+}
+
+function software_h264 {
+    local file_to_cast
+    file_to_cast="$3"
+
+    local USERNAME PASSWORD
+    USERNAME="$1"
+    PASSWORD="$2"
+
+    # -bf 0 :: Disable b-frames because webrtc doesn't support h264 streams with b-frames.
+    exec ffmpeg \
+        -re \
+        -stream_loop -1 \
+        -i "$file_to_cast" \
+        -c:v h264 \
+        -bf 0 \
+        -c:a aac \
+        -b:a 160k \
+        -ar 44100 \
+        -f rtsp \
+        -rtsp_transport udp \
+        "rtsp://$USERNAME:$PASSWORD@172.16.16.251:8554/fetch"
+}
+
+function preprocess_h264 {
+    local file_to_cast file_to_save
+    file_to_cast="$1"
+    file_to_save="$2"
+
+    # -bf 0 :: Disable b-frames because webrtc doesn't support h264 streams with b-frames.
+    exec ffmpeg \
+        -i "$file_to_cast" \
+        -c:v h264 \
+        -bf 0 \
+        -c:a aac \
+        -b:a 160k \
+        -ar 44100 \
+        "$file_to_save"
+}
+
+function preprocess_vp8 {
+    local file_to_cast file_to_save
+    file_to_cast="$1"
+    file_to_save="$2"
+
+    # -bf 0 :: Disable b-frames because webrtc doesn't support h264 streams with b-frames.
+    # -strict -2 :: Enable support for experimental codecs like opus.
+    # -b:v 1M :: Target 1 megabit/s
+    # -crf 10 :: Target a quality level and adjust bitrate accordingly. This should be preferred, but ideally both should be used.
+    exec ffmpeg \
+        -i "$file_to_cast" \
+        -c:v vp8 \
+        -b:v 1M \
+        -crf 10 \
+        -bf 0 \
+        -c:a opus \
+        -b:a 320k \
+        -ar 48000 \
+        -strict -2 \
+        "$file_to_save"
+}
+
+function webcam {
+    # Uses on-webcam h264 encoding.
+
+    local USERNAME PASSWORD
+    USERNAME="$1"
+    PASSWORD="$2"
+
+    exec ffmpeg \
+        -re \
+        -input_format h264 \
+        -video_size 1920x1080 \
+        -i /dev/video0 \
+        -c:v copy \
+        -an \
+        -f rtsp \
+        -rtsp_transport udp \
+        "rtsp://$USERNAME:$PASSWORD@172.16.16.251:8554/fetch"
+}
+
+function encode_webcam {
+    # Uses hardware accelerated gpu-based encoding.
+
+    local USERNAME PASSWORD
+    USERNAME="$1"
+    PASSWORD="$2"
+
+    exec ffmpeg \
+        -re \
+        -vaapi_device /dev/dri/renderD128 \
+        -i /dev/video0 \
+        -vf 'format=nv12,hwupload' \
+        -c:v h264_vaapi \
+        -an \
+        -f rtsp \
+        -rtsp_transport udp \
+        "rtsp://$USERNAME:$PASSWORD@172.16.16.251:8554/fetch"
+}
+
+main "${@}"

router/k8s-stream.yaml

@@ -0,0 +1,14 @@
+apiVersion: cert-manager.io/v1
+kind: Certificate
+metadata:
+  name: stream-cert
+  namespace: default
+spec:
+  dnsNames:
+    - "home.fizz.buzz"
+    - "stream.fizz.buzz"
+  secretName: stream-cert
+  issuerRef:
+    name: letsencrypt-prd
+    kind: ClusterIssuer
+    group: cert-manager.io

router/launch_mediamtx.bash

@@ -0,0 +1,151 @@
+#!/usr/local/bin/bash
+#
+set -euo pipefail
+IFS=$'\n\t'
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+: ${CD:=""}
+: ${VNC_ENABLE:="NO"}
+: ${VNC_LISTEN:="127.0.0.1:5900"}
+: ${PID_FILE:="/var/run/mediamtx.pid"}
+
+############## Setup #########################
+
+function cleanup {
+    for vm in "${vms[@]}"; do
+        log "Destroying bhyve vm $vm"
+        bhyvectl "--vm=$vm" --destroy
+        log "Destroyed bhyve vm $vm"
+    done
+}
+vms=()
+for sig in EXIT INT QUIT HUP TERM; do
+  trap "set +e; sleep 10; cleanup" "$sig"
+done
+
+function die {
+    local status_code="$1"
+    shift
+    (>&2 echo "${@}")
+    exit "$status_code"
+}
+
+function log {
+    (>&2 echo "${@}")
+}
+
+############## Program #########################
+
+function main {
+    start_vm
+}
+
+function start_vm {
+    local name="mediamtx"
+
+
+
+    # -H release the CPU when guest issues HLT instruction. Otherwise 100% of core will be consumed.
+         # -s 3,ahci-cd,/vm/.iso/archlinux-2023.04.01-x86_64.iso \
+             # -s 29,fbuf,tcp=0.0.0.0:5900,w=1920,h=1080,wait \
+            # -s 29,fbuf,tcp=0.0.0.0:5900,w=1920,h=1080 \
+
+    # TODO: Look into using nmdm instead of stdio for serial console
+    if [ -n "$CD" ]; then
+        additional_args+=("-s" "5,ahci-cd,$CD")
+    fi
+    if [ "$VNC_ENABLE" = "YES" ]; then
+        additional_args+=("-s" "29,fbuf,tcp=$VNC_LISTEN,w=1920,h=1080")
+    fi
+
+    local bridge_name="bridge_vm"
+    wait_for_bridge "$bridge_name"
+
+    local mac_address
+    mac_address=$(calculate_mac_address "$name")
+
+    local bridge_link_name
+    bridge_link_name=$(detect_available_link "${bridge_name}")
+
+    # additional_args+=("-s" "2:0,virtio-net,netgraph,path=${bridge_name}:,peerhook=${bridge_link_name},mac=${mac_address}")
+    additional_args+=("-s" "2:0,virtio-net,netgraph,path=${bridge_name}:,peerhook=${bridge_link_name},mac=${mac_address}" "-s" "3,ahci-cd,/home/talexander/disk.iso")
+    vms+=("$name")
+    while true; do
+        set -x
+        set +e
+        bhyve \
+            -D \
+            -c 1 \
+            -m 3G \
+            -H \
+            -o 'rtc.use_localtime=false' \
+            -s 0,hostbridge \
+            -s "4,nvme,/dev/zvol/zroot/vm/mediamtx/disk0" \
+            -s 30,xhci,tablet \
+            -s 31,lpc -l com1,stdio \
+            -l "bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI.fd,/vm/mediamtx/BHYVE_UEFI_VARS.fd" \
+            "${additional_args[@]}" \
+            "$name"
+        # local bhyvepid=$!
+        # echo "$bhyvepid" > "$PID_FILE"
+        # wait $bhyvepid
+        local exit_code=$?
+        set +x
+        set -e
+        if [ $exit_code -eq 0 ]; then
+            echo "Rebooting."
+            sleep 5
+        elif [ $exit_code -eq 1 ]; then
+            echo "Powered off."
+            break
+        elif [ $exit_code -eq 2 ]; then
+            echo "Halted."
+            break
+        elif [ $exit_code -eq 3 ]; then
+            echo "Triple fault."
+            break
+        elif [ $exit_code -eq 4 ]; then
+            echo "Exited due to an error."
+            break
+        fi
+    done
+}
+
+function ng_exists {
+    ngctl status "${1}" >/dev/null 2>&1
+}
+
+function wait_for_bridge {
+    local bridge_name="$1"
+    while ! ng_exists "${bridge_name}:"; do
+        echo "${bridge_name} does not yet exist, sleeping."
+        sleep 10
+    done
+}
+
+function detect_available_link {
+    local bridge_name="$1"
+    local linknum=1
+    while true; do
+        local link_name="link${linknum}"
+        if ! ng_exists "${bridge_name}:${link_name}"; then
+            echo "$link_name"
+            return
+        fi
+        linknum=$((linknum + 1))
+        if [ "$linknum" -gt 90 ]; then
+            (>&2 echo "No available links on bridge $bridge_name")
+            exit 1
+        fi
+    done
+}
+
+function calculate_mac_address {
+    local name="$1"
+    local source
+    source=$(md5 -r -s "$name" | awk '{print $1}')
+    echo "06:${source:0:2}:${source:2:2}:${source:4:2}:${source:6:2}:${source:8:2}"
+}
+
+
+main "${@}"

router/launch_opnsense.bash

@@ -73,7 +73,7 @@ function start_vm {
         set +e
         bhyve \
             -D \
-            -c 6 \
+            -c 4 \
             -m 8G \
             -H \
             -o 'rtc.use_localtime=false' \

router/mediamtx_rc.bash

@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# REQUIRE: FILESYSTEMS kld
+# PROVIDE: mediamtx
+# BEFORE: netif
+
+. /etc/rc.subr
+name=mediamtx
+rcvar=${name}_enable
+start_cmd="${name}_start"
+stop_cmd="${name}_stop"
+status_cmd="${name}_status"
+load_rc_config $name
+
+tmux_name="mediamtx"
+
+mediamtx_start() {
+    /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=YES VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_mediamtx.bash"
+    # /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=NO VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_mediamtx.bash"
+}
+
+mediamtx_status() {
+    if /usr/local/bin/tmux has-session -t $tmux_name 2>/dev/null; then
+	echo "$tmux_name is running."
+    else
+	echo "$tmux_name is not running."
+	return 1
+    fi
+}
+
+mediamtx_stop() {
+    /usr/local/bin/tmux has-session -t $tmux_name 2>/dev/null && (
+        /usr/local/bin/tmux kill-session -t $tmux_name
+        sleep 10
+        bhyvectl --vm=mediamtx --destroy
+        # kill `cat /var/run/mediamtx.pid`
+    )
+    mediamtx_wait_for_end
+}
+
+mediamtx_wait_for_end() {
+    while /usr/local/bin/tmux has-session -t $tmux_name 2>dev/null; do
+        sleep 1
+    done
+}
+
+run_rc_command "$1"

router/stream.yml

@@ -0,0 +1,727 @@
+#
+# How to update cert:
+#
+#   kubectl apply -f k8s-stream.yaml
+#   kubectl wait --for=condition=ready=true --timeout=300s -n default certificate stream-cert
+#   decrypt_k8s_secret -n default stream-cert | jq -r '.["tls.crt"]' | tee server.crt
+#   decrypt_k8s_secret -n default stream-cert | jq -r '.["tls.key"]' | tee server.key
+#   kdel -f k8s-stream.yaml
+#   gpg_auth scp stream.yml server.crt server.key 172.16.16.251:~/ ; gpg_auth ssh 172.16.16.251 doas install -o root -g root -m 0644 stream.yml server.crt /etc/mediamtx/ ; gpg_auth ssh 172.16.16.251 doas install -o root -g root -m 0600 server.key /etc/mediamtx/
+
+###############################################
+# Global settings
+
+# Settings in this section are applied anywhere.
+
+###############################################
+# Global settings -> General
+
+# Verbosity of the program; available values are "error", "warn", "info", "debug".
+logLevel: info
+# Destinations of log messages; available values are "stdout", "file" and "syslog".
+logDestinations: [stdout]
+# If "file" is in logDestinations, this is the file which will receive the logs.
+logFile: mediamtx.log
+
+# Timeout of read operations.
+readTimeout: 10s
+# Timeout of write operations.
+writeTimeout: 10s
+# Size of the queue of outgoing packets.
+# A higher value allows to increase throughput, a lower value allows to save RAM.
+writeQueueSize: 512
+# Maximum size of outgoing UDP packets.
+# This can be decreased to avoid fragmentation on networks with a low UDP MTU.
+udpMaxPayloadSize: 1472
+
+# Command to run when a client connects to the server.
+# This is terminated with SIGINT when a client disconnects from the server.
+# The following environment variables are available:
+# * RTSP_PORT: RTSP server port
+# * MTX_CONN_TYPE: connection type
+# * MTX_CONN_ID: connection ID
+runOnConnect:
+# Restart the command if it exits.
+runOnConnectRestart: no
+# Command to run when a client disconnects from the server.
+# Environment variables are the same of runOnConnect.
+runOnDisconnect:
+
+###############################################
+# Global settings -> Authentication
+
+# Authentication method. Available values are:
+# * internal: users are stored in the configuration file
+# * http: an external HTTP URL is contacted to perform authentication
+# * jwt: an external identity server provides authentication through JWTs
+authMethod: internal
+
+# Internal authentication.
+# list of users.
+authInternalUsers:
+  # Default unprivileged user.
+  # Username. 'any' means any user, including anonymous ones.
+  - user: any
+    # Password. Not used in case of 'any' user.
+    pass:
+    # IPs or networks allowed to use this user. An empty list means any IP.
+    ips: []
+    # List of permissions.
+    permissions:
+      []
+      # # Available actions are: publish, read, playback, api, metrics, pprof.
+      # - action: publish
+      #   # Paths can be set to further restrict access to a specific path.
+      #   # An empty path means any path.
+      #   # Regular expressions can be used by using a tilde as prefix.
+      #   path:
+      # - action: read
+      #   path:
+      # - action: playback
+      #   path:
+  - user: heyheyyouyou
+    # Password. Not used in case of 'any' user.
+    pass: idontlikeyourgirlfriend
+    # IPs or networks allowed to use this user. An empty list means any IP.
+    ips: []
+    # List of permissions.
+    permissions:
+      # Available actions are: publish, read, playback, api, metrics, pprof.
+      - action: publish
+        # Paths can be set to further restrict access to a specific path.
+        # An empty path means any path.
+        # Regular expressions can be used by using a tilde as prefix.
+        path:
+      - action: read
+        path:
+      - action: playback
+        path:
+
+    # Default administrator.
+    # This allows to use API, metrics and PPROF without authentication,
+    # if the IP is localhost.
+  - user: any
+    pass:
+    ips: ["127.0.0.1", "::1"]
+    permissions:
+      - action: api
+      - action: metrics
+      - action: pprof
+
+# HTTP-based authentication.
+# URL called to perform authentication. Every time a user wants
+# to authenticate, the server calls this URL with the POST method
+# and a body containing:
+# {
+#   "user": "user",
+#   "password": "password",
+#   "ip": "ip",
+#   "action": "publish|read|playback|api|metrics|pprof",
+#   "path": "path",
+#   "protocol": "rtsp|rtmp|hls|webrtc|srt",
+#   "id": "id",
+#   "query": "query"
+# }
+# If the response code is 20x, authentication is accepted, otherwise
+# it is discarded.
+authHTTPAddress:
+# Actions to exclude from HTTP-based authentication.
+# Format is the same as the one of user permissions.
+authHTTPExclude:
+  - action: api
+  - action: metrics
+  - action: pprof
+
+# JWT-based authentication.
+# Users have to login through an external identity server and obtain a JWT.
+# This JWT must contain the claim "mediamtx_permissions" with permissions,
+# for instance:
+# {
+#  ...
+#  "mediamtx_permissions": [
+#     {
+#       "action": "publish",
+#       "path": "somepath"
+#     }
+#   ]
+# }
+# Users are expected to pass the JWT in the Authorization header or as a query parameter.
+# This is the JWKS URL that will be used to pull (once) the public key that allows
+# to validate JWTs.
+authJWTJWKS:
+
+###############################################
+# Global settings -> Control API
+
+# Enable controlling the server through the Control API.
+api: no
+# Address of the Control API listener.
+apiAddress: :9997
+# Enable TLS/HTTPS on the Control API server.
+apiEncryption: no
+# Path to the server key. This is needed only when encryption is yes.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+apiServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+apiServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+apiAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the HTTP server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+apiTrustedProxies: []
+
+###############################################
+# Global settings -> Metrics
+
+# Enable Prometheus-compatible metrics.
+metrics: no
+# Address of the metrics HTTP listener.
+metricsAddress: :9998
+# Enable TLS/HTTPS on the Metrics server.
+metricsEncryption: no
+# Path to the server key. This is needed only when encryption is yes.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+metricsServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+metricsServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+metricsAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the HTTP server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+metricsTrustedProxies: []
+
+###############################################
+# Global settings -> PPROF
+
+# Enable pprof-compatible endpoint to monitor performances.
+pprof: no
+# Address of the pprof listener.
+pprofAddress: :9999
+# Enable TLS/HTTPS on the pprof server.
+pprofEncryption: no
+# Path to the server key. This is needed only when encryption is yes.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+pprofServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+pprofServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+pprofAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the HTTP server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+pprofTrustedProxies: []
+
+###############################################
+# Global settings -> Playback server
+
+# Enable downloading recordings from the playback server.
+playback: no
+# Address of the playback server listener.
+playbackAddress: :9996
+# Enable TLS/HTTPS on the playback server.
+playbackEncryption: no
+# Path to the server key. This is needed only when encryption is yes.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+playbackServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+playbackServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+playbackAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the HTTP server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+playbackTrustedProxies: []
+
+###############################################
+# Global settings -> RTSP server
+
+# Enable publishing and reading streams with the RTSP protocol.
+rtsp: yes
+# List of enabled RTSP transport protocols.
+# UDP is the most performant, but doesn't work when there's a NAT/firewall between
+# server and clients, and doesn't support encryption.
+# UDP-multicast allows to save bandwidth when clients are all in the same LAN.
+# TCP is the most versatile, and does support encryption.
+# The handshake is always performed with TCP.
+protocols: [udp, multicast, tcp]
+# Encrypt handshakes and TCP streams with TLS (RTSPS).
+# Available values are "no", "strict", "optional".
+encryption: "no"
+# Address of the TCP/RTSP listener. This is needed only when encryption is "no" or "optional".
+rtspAddress: :8554
+# Address of the TCP/TLS/RTSPS listener. This is needed only when encryption is "strict" or "optional".
+rtspsAddress: :8322
+# Address of the UDP/RTP listener. This is needed only when "udp" is in protocols.
+rtpAddress: :8000
+# Address of the UDP/RTCP listener. This is needed only when "udp" is in protocols.
+rtcpAddress: :8001
+# IP range of all UDP-multicast listeners. This is needed only when "multicast" is in protocols.
+multicastIPRange: 224.1.0.0/16
+# Port of all UDP-multicast/RTP listeners. This is needed only when "multicast" is in protocols.
+multicastRTPPort: 8002
+# Port of all UDP-multicast/RTCP listeners. This is needed only when "multicast" is in protocols.
+multicastRTCPPort: 8003
+# Path to the server key. This is needed only when encryption is "strict" or "optional".
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+serverKey: /etc/mediamtx/server.key
+# Path to the server certificate. This is needed only when encryption is "strict" or "optional".
+serverCert: /etc/mediamtx/server.crt
+# Authentication methods. Available are "basic" and "digest".
+# "digest" doesn't provide any additional security and is available for compatibility only.
+rtspAuthMethods: [basic]
+
+###############################################
+# Global settings -> RTMP server
+
+# Enable publishing and reading streams with the RTMP protocol.
+rtmp: yes
+# Address of the RTMP listener. This is needed only when encryption is "no" or "optional".
+rtmpAddress: :1935
+# Encrypt connections with TLS (RTMPS).
+# Available values are "no", "strict", "optional".
+rtmpEncryption: "no"
+# Address of the RTMPS listener. This is needed only when encryption is "strict" or "optional".
+rtmpsAddress: :1936
+# Path to the server key. This is needed only when encryption is "strict" or "optional".
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+rtmpServerKey: /etc/mediamtx/server.key
+# Path to the server certificate. This is needed only when encryption is "strict" or "optional".
+rtmpServerCert: /etc/mediamtx/server.crt
+
+###############################################
+# Global settings -> HLS server
+
+# Enable reading streams with the HLS protocol.
+hls: yes
+# Address of the HLS listener.
+hlsAddress: :8888
+# Enable TLS/HTTPS on the HLS server.
+# This is required for Low-Latency HLS.
+hlsEncryption: yes
+# Path to the server key. This is needed only when encryption is yes.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+hlsServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+hlsServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+# This allows to play the HLS stream from an external website.
+hlsAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the HLS server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+hlsTrustedProxies: []
+# By default, HLS is generated only when requested by a user.
+# This option allows to generate it always, avoiding the delay between request and generation.
+hlsAlwaysRemux: no
+# Variant of the HLS protocol to use. Available options are:
+# * mpegts - uses MPEG-TS segments, for maximum compatibility.
+# * fmp4 - uses fragmented MP4 segments, more efficient.
+# * lowLatency - uses Low-Latency HLS.
+hlsVariant: lowLatency
+# Number of HLS segments to keep on the server.
+# Segments allow to seek through the stream.
+# Their number doesn't influence latency.
+hlsSegmentCount: 7
+# Minimum duration of each segment.
+# A player usually puts 3 segments in a buffer before reproducing the stream.
+# The final segment duration is also influenced by the interval between IDR frames,
+# since the server changes the duration in order to include at least one IDR frame
+# in each segment.
+hlsSegmentDuration: 1s
+# Minimum duration of each part.
+# A player usually puts 3 parts in a buffer before reproducing the stream.
+# Parts are used in Low-Latency HLS in place of segments.
+# Part duration is influenced by the distance between video/audio samples
+# and is adjusted in order to produce segments with a similar duration.
+hlsPartDuration: 200ms
+# Maximum size of each segment.
+# This prevents RAM exhaustion.
+hlsSegmentMaxSize: 50M
+# Directory in which to save segments, instead of keeping them in the RAM.
+# This decreases performance, since reading from disk is less performant than
+# reading from RAM, but allows to save RAM.
+hlsDirectory: ""
+# The muxer will be closed when there are no
+# reader requests and this amount of time has passed.
+hlsMuxerCloseAfter: 60s
+
+###############################################
+# Global settings -> WebRTC server
+
+# Enable publishing and reading streams with the WebRTC protocol.
+webrtc: yes
+# Address of the WebRTC HTTP listener.
+webrtcAddress: :8889
+# Enable TLS/HTTPS on the WebRTC server.
+webrtcEncryption: yes
+# Path to the server key.
+# This can be generated with:
+# openssl genrsa -out server.key 2048
+# openssl req -new -x509 -sha256 -key server.key -out server.crt -days 3650
+webrtcServerKey: /etc/mediamtx/server.key
+# Path to the server certificate.
+webrtcServerCert: /etc/mediamtx/server.crt
+# Value of the Access-Control-Allow-Origin header provided in every HTTP response.
+# This allows to play the WebRTC stream from an external website.
+webrtcAllowOrigin: "*"
+# List of IPs or CIDRs of proxies placed before the WebRTC server.
+# If the server receives a request from one of these entries, IP in logs
+# will be taken from the X-Forwarded-For header.
+webrtcTrustedProxies: []
+# Address of a local UDP listener that will receive connections.
+# Use a blank string to disable.
+webrtcLocalUDPAddress: :8189
+# Address of a local TCP listener that will receive connections.
+# This is disabled by default since TCP is less efficient than UDP and
+# introduces a progressive delay when network is congested.
+webrtcLocalTCPAddress: ""
+# WebRTC clients need to know the IP of the server.
+# Gather IPs from interfaces and send them to clients.
+webrtcIPsFromInterfaces: no
+# List of interfaces whose IPs will be sent to clients.
+# An empty value means to use all available interfaces.
+webrtcIPsFromInterfacesList: []
+# List of additional hosts or IPs to send to clients.
+webrtcAdditionalHosts: [68.197.252.15, stream.fizz.buzz]
+# webrtcAdditionalHosts: []
+# ICE servers. Needed only when local listeners can't be reached by clients.
+# STUN servers allows to obtain and share the public IP of the server.
+# TURN/TURNS servers forces all traffic through them.
+webrtcICEServers2:
+  []
+  # - url: stun:stun.cloudflare.com:3478
+  # - url: stun:stun.l.google.com:19302
+  # if user is "AUTH_SECRET", then authentication is secret based.
+  # the secret must be inserted into the password field.
+  # username: ''
+  # password: ''
+  # clientOnly: false
+# Time to wait for the WebRTC handshake to complete.
+webrtcHandshakeTimeout: 10s
+# Maximum time to gather video tracks.
+webrtcTrackGatherTimeout: 2s
+
+###############################################
+# Global settings -> SRT server
+
+# Enable publishing and reading streams with the SRT protocol.
+srt: yes
+# Address of the SRT listener.
+srtAddress: :8890
+
+###############################################
+# Default path settings
+
+# Settings in "pathDefaults" are applied anywhere,
+# unless they are overridden in "paths".
+pathDefaults:
+  ###############################################
+  # Default path settings -> General
+
+  # Source of the stream. This can be:
+  # * publisher -> the stream is provided by a RTSP, RTMP, WebRTC or SRT client
+  # * rtsp://existing-url -> the stream is pulled from another RTSP server / camera
+  # * rtsps://existing-url -> the stream is pulled from another RTSP server / camera with RTSPS
+  # * rtmp://existing-url -> the stream is pulled from another RTMP server / camera
+  # * rtmps://existing-url -> the stream is pulled from another RTMP server / camera with RTMPS
+  # * http://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera
+  # * https://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera with HTTPS
+  # * udp://ip:port -> the stream is pulled with UDP, by listening on the specified IP and port
+  # * srt://existing-url -> the stream is pulled from another SRT server / camera
+  # * whep://existing-url -> the stream is pulled from another WebRTC server / camera
+  # * wheps://existing-url -> the stream is pulled from another WebRTC server / camera with HTTPS
+  # * redirect -> the stream is provided by another path or server
+  # * rpiCamera -> the stream is provided by a Raspberry Pi Camera
+  # If path name is a regular expression, $G1, G2, etc will be replaced
+  # with regular expression groups.
+  source: publisher
+  # If the source is a URL, and the source certificate is self-signed
+  # or invalid, you can provide the fingerprint of the certificate in order to
+  # validate it anyway. It can be obtained by running:
+  # openssl s_client -connect source_ip:source_port </dev/null 2>/dev/null | sed -n '/BEGIN/,/END/p' > server.crt
+  # openssl x509 -in server.crt -noout -fingerprint -sha256 | cut -d "=" -f2 | tr -d ':'
+  sourceFingerprint:
+  # If the source is a URL, it will be pulled only when at least
+  # one reader is connected, saving bandwidth.
+  sourceOnDemand: no
+  # If sourceOnDemand is "yes", readers will be put on hold until the source is
+  # ready or until this amount of time has passed.
+  sourceOnDemandStartTimeout: 10s
+  # If sourceOnDemand is "yes", the source will be closed when there are no
+  # readers connected and this amount of time has passed.
+  sourceOnDemandCloseAfter: 10s
+  # Maximum number of readers. Zero means no limit.
+  maxReaders: 0
+  # SRT encryption passphrase require to read from this path
+  srtReadPassphrase:
+  # If the stream is not available, redirect readers to this path.
+  # It can be can be a relative path (i.e. /otherstream) or an absolute RTSP URL.
+  fallback:
+
+  ###############################################
+  # Default path settings -> Record
+
+  # Record streams to disk.
+  record: no
+  # Path of recording segments.
+  # Extension is added automatically.
+  # Available variables are %path (path name), %Y %m %d %H %M %S %f %s (time in strftime format)
+  recordPath: ./recordings/%path/%Y-%m-%d_%H-%M-%S-%f
+  # Format of recorded segments.
+  # Available formats are "fmp4" (fragmented MP4) and "mpegts" (MPEG-TS).
+  recordFormat: fmp4
+  # fMP4 segments are concatenation of small MP4 files (parts), each with this duration.
+  # MPEG-TS segments are concatenation of 188-bytes packets, flushed to disk with this period.
+  # When a system failure occurs, the last part gets lost.
+  # Therefore, the part duration is equal to the RPO (recovery point objective).
+  recordPartDuration: 1s
+  # Minimum duration of each segment.
+  recordSegmentDuration: 1h
+  # Delete segments after this timespan.
+  # Set to 0s to disable automatic deletion.
+  recordDeleteAfter: 24h
+
+  ###############################################
+  # Default path settings -> Publisher source (when source is "publisher")
+
+  # Allow another client to disconnect the current publisher and publish in its place.
+  overridePublisher: yes
+  # SRT encryption passphrase required to publish to this path
+  srtPublishPassphrase:
+
+  ###############################################
+  # Default path settings -> RTSP source (when source is a RTSP or a RTSPS URL)
+
+  # Transport protocol used to pull the stream. available values are "automatic", "udp", "multicast", "tcp".
+  rtspTransport: automatic
+  # Support sources that don't provide server ports or use random server ports. This is a security issue
+  # and must be used only when interacting with sources that require it.
+  rtspAnyPort: no
+  # Range header to send to the source, in order to start streaming from the specified offset.
+  # available values:
+  # * clock: Absolute time
+  # * npt: Normal Play Time
+  # * smpte: SMPTE timestamps relative to the start of the recording
+  rtspRangeType:
+  # Available values:
+  # * clock: UTC ISO 8601 combined date and time string, e.g. 20230812T120000Z
+  # * npt: duration such as "300ms", "1.5m" or "2h45m", valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h"
+  # * smpte: duration such as "300ms", "1.5m" or "2h45m", valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h"
+  rtspRangeStart:
+
+  ###############################################
+  # Default path settings -> Redirect source (when source is "redirect")
+
+  # RTSP URL which clients will be redirected to.
+  sourceRedirect:
+
+  ###############################################
+  # Default path settings -> Raspberry Pi Camera source (when source is "rpiCamera")
+
+  # ID of the camera
+  rpiCameraCamID: 0
+  # width of frames
+  rpiCameraWidth: 1920
+  # height of frames
+  rpiCameraHeight: 1080
+  # flip horizontally
+  rpiCameraHFlip: false
+  # flip vertically
+  rpiCameraVFlip: false
+  # brightness [-1, 1]
+  rpiCameraBrightness: 0
+  # contrast [0, 16]
+  rpiCameraContrast: 1
+  # saturation [0, 16]
+  rpiCameraSaturation: 1
+  # sharpness [0, 16]
+  rpiCameraSharpness: 1
+  # exposure mode.
+  # values: normal, short, long, custom
+  rpiCameraExposure: normal
+  # auto-white-balance mode.
+  # values: auto, incandescent, tungsten, fluorescent, indoor, daylight, cloudy, custom
+  rpiCameraAWB: auto
+  # auto-white-balance fixed gains. This can be used in place of rpiCameraAWB.
+  # format: [red,blue]
+  rpiCameraAWBGains: [0, 0]
+  # denoise operating mode.
+  # values: off, cdn_off, cdn_fast, cdn_hq
+  rpiCameraDenoise: "off"
+  # fixed shutter speed, in microseconds.
+  rpiCameraShutter: 0
+  # metering mode of the AEC/AGC algorithm.
+  # values: centre, spot, matrix, custom
+  rpiCameraMetering: centre
+  # fixed gain
+  rpiCameraGain: 0
+  # EV compensation of the image [-10, 10]
+  rpiCameraEV: 0
+  # Region of interest, in format x,y,width,height
+  rpiCameraROI:
+  # whether to enable HDR on Raspberry Camera 3.
+  rpiCameraHDR: false
+  # tuning file
+  rpiCameraTuningFile:
+  # sensor mode, in format [width]:[height]:[bit-depth]:[packing]
+  # bit-depth and packing are optional.
+  rpiCameraMode:
+  # frames per second
+  rpiCameraFPS: 30
+  # period between IDR frames
+  rpiCameraIDRPeriod: 60
+  # bitrate
+  rpiCameraBitrate: 1000000
+  # H264 profile
+  rpiCameraProfile: main
+  # H264 level
+  rpiCameraLevel: "4.1"
+  # Autofocus mode
+  # values: auto, manual, continuous
+  rpiCameraAfMode: continuous
+  # Autofocus range
+  # values: normal, macro, full
+  rpiCameraAfRange: normal
+  # Autofocus speed
+  # values: normal, fast
+  rpiCameraAfSpeed: normal
+  # Lens position (for manual autofocus only), will be set to focus to a specific distance
+  # calculated by the following formula: d = 1 / value
+  # Examples: 0 moves the lens to infinity.
+  #           0.5 moves the lens to focus on objects 2m away.
+  #           2 moves the lens to focus on objects 50cm away.
+  rpiCameraLensPosition: 0.0
+  # Specifies the autofocus window, in the form x,y,width,height where the coordinates
+  # are given as a proportion of the entire image.
+  rpiCameraAfWindow:
+  # enables printing text on each frame.
+  rpiCameraTextOverlayEnable: false
+  # text that is printed on each frame.
+  # format is the one of the strftime() function.
+  rpiCameraTextOverlay: "%Y-%m-%d %H:%M:%S - MediaMTX"
+
+  ###############################################
+  # Default path settings -> Hooks
+
+  # Command to run when this path is initialized.
+  # This can be used to publish a stream when the server is launched.
+  # This is terminated with SIGINT when the program closes.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  runOnInit:
+  # Restart the command if it exits.
+  runOnInitRestart: no
+
+  # Command to run when this path is requested by a reader
+  # and no one is publishing to this path yet.
+  # This can be used to publish a stream on demand.
+  # This is terminated with SIGINT when there are no readers anymore.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * MTX_QUERY: query parameters (passed by first reader)
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  runOnDemand:
+  # Restart the command if it exits.
+  runOnDemandRestart: no
+  # Readers will be put on hold until the runOnDemand command starts publishing
+  # or until this amount of time has passed.
+  runOnDemandStartTimeout: 10s
+  # The command will be closed when there are no
+  # readers connected and this amount of time has passed.
+  runOnDemandCloseAfter: 10s
+  # Command to run when there are no readers anymore.
+  # Environment variables are the same of runOnDemand.
+  runOnUnDemand:
+
+  # Command to run when the stream is ready to be read, whenever it is
+  # published by a client or pulled from a server / camera.
+  # This is terminated with SIGINT when the stream is not ready anymore.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * MTX_QUERY: query parameters (passed by publisher)
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  # * MTX_SOURCE_TYPE: source type
+  # * MTX_SOURCE_ID: source ID
+  runOnReady:
+  # Restart the command if it exits.
+  runOnReadyRestart: no
+  # Command to run when the stream is not available anymore.
+  # Environment variables are the same of runOnReady.
+  runOnNotReady:
+
+  # Command to run when a client starts reading.
+  # This is terminated with SIGINT when a client stops reading.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * MTX_QUERY: query parameters (passed by reader)
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  # * MTX_READER_TYPE: reader type
+  # * MTX_READER_ID: reader ID
+  runOnRead:
+  # Restart the command if it exits.
+  runOnReadRestart: no
+  # Command to run when a client stops reading.
+  # Environment variables are the same of runOnRead.
+  runOnUnread:
+
+  # Command to run when a recording segment is created.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  # * MTX_SEGMENT_PATH: segment file path
+  runOnRecordSegmentCreate:
+
+  # Command to run when a recording segment is complete.
+  # The following environment variables are available:
+  # * MTX_PATH: path name
+  # * RTSP_PORT: RTSP server port
+  # * G1, G2, ...: regular expression groups, if path name is
+  #   a regular expression.
+  # * MTX_SEGMENT_PATH: segment file path
+  # * MTX_SEGMENT_DURATION: segment duration
+  runOnRecordSegmentComplete:
+
+###############################################
+# Path settings
+
+# Settings in "paths" are applied to specific paths, and the map key
+# is the name of the path.
+# Any setting in "pathDefaults" can be overridden here.
+# It's possible to use regular expressions by using a tilde as prefix,
+# for example "~^(test1|test2)$" will match both "test1" and "test2",
+# for example "~^prefix" will match all paths that start with "prefix".
+paths:
+  # example:
+  # my_camera:
+  #   source: rtsp://my_camera
+
+  # Settings under path "all_others" are applied to all paths that
+  # do not match another entry.
+  all_others:

router/unifi_rc.bash

@@ -5,7 +5,7 @@
 # BEFORE: netif
 
 . /etc/rc.subr
-name=opnsense
+name=unifi
 rcvar=${name}_enable
 start_cmd="${name}_start"
 stop_cmd="${name}_stop"
@@ -14,12 +14,12 @@ load_rc_config $name
 
 tmux_name="unifi"
 
-opnsense_start() {
+unifi_start() {
-    # /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=YES VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_opnsense.bash"
+    /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=YES VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_unifi.bash"
-    /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=NO VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_unifi.bash"
+    # /usr/local/bin/tmux new-session -d -s "$tmux_name" "/usr/bin/env VNC_ENABLE=NO VNC_LISTEN=0.0.0.0:5900 /usr/local/bin/bash /home/talexander/launch_unifi.bash"
 }
 
-opnsense_status() {
+unifi_status() {
     if /usr/local/bin/tmux has-session -t $tmux_name 2>/dev/null; then
 	echo "$tmux_name is running."
     else
@@ -28,17 +28,17 @@ opnsense_status() {
     fi
 }
 
-opnsense_stop() {
+unifi_stop() {
     /usr/local/bin/tmux has-session -t $tmux_name 2>/dev/null && (
         /usr/local/bin/tmux kill-session -t $tmux_name
         sleep 10
         bhyvectl --vm=unifi --destroy
-        # kill `cat /var/run/opnsense.pid`
+        # kill `cat /var/run/unifi.pid`
     )
-    opnsense_wait_for_end
+    unifi_wait_for_end
 }
 
-opnsense_wait_for_end() {
+unifi_wait_for_end() {
     while /usr/local/bin/tmux has-session -t $tmux_name 2>dev/null; do
         sleep 1
     done